Saving Electrical Energy with a Heat Pump: 75%

Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
1 reply · 2K views
M9501
Messages
3
Reaction score
0

Homework Statement


The electrical energy supplied to a heater can be turned with 100% efficiency into thermal energy (room heating).Assume you use a heat pump with a COP of 4 instead to reach the same temperature
increase in the room.How much electrical energy will you save ?


Homework Equations


COP(heating)=Qh/W=Qc+W/W;

The Attempt at a Solution


Firstly i thought about getting the percentage of energy used which is equal to the work and then getting the percentage of energy saved by subtraction (100%-%ofUsedEnergy).

since temperature is constant then Qh is constant(am i correct?)
W=1/4 Qh (i guess something is wrong here)
∴the percentage of energy used=100*1/4=25%

∴the percentage of energy saved=75%
 
Physics news on Phys.org
M9501 said:

Homework Statement


The electrical energy supplied to a heater can be turned with 100% efficiency into thermal energy (room heating).Assume you use a heat pump with a COP of 4 instead to reach the same temperature
increase in the room.How much electrical energy will you save ?


Homework Equations


COP(heating)=Qh/W=(Qc+W)/W;

The Attempt at a Solution


Firstly i thought about getting the percentage of energy used which is equal to the work and then getting the percentage of energy saved by subtraction (100%-%ofUsedEnergy).

since temperature is constant then Qh is constant(am i correct?)
W=1/4 Qh (i guess something is wrong here)
Why?
the percentage of energy saved=75%

Your conclusion is correct. (That's why I run a heat pump myself! Unfortunately, if Tc drops too far then the Carnot efficiency drops: Qh/W = Th/(Th - Tc) so for the same Th the colder Tc the lower the COP. Of course, refrigerators in general do not use a Carnot cycle. Part of the cycle is via a throttling process {"expansion valve"} which is an irreversible part of the refrigeration cycle.)