Can You Create a Smoke Ring Using Only Air in Cold Weather?

  • Thread starter Thread starter kompabt
  • Start date Start date
  • Tags Tags
    Air Ring Smoke
AI Thread Summary
A "smoke" ring can be created using only air in cold conditions by utilizing the water vapor in exhaled breath, which condenses into a visible mist. This mist can be shaped into a ring using the same technique as with tobacco smoke. Many individuals in colder climates have experimented with this method, achieving varying degrees of success. The process involves a "popping" technique similar to that used for traditional smoke rings. Overall, it is possible to create a ring effect without actual smoke.
kompabt
Messages
8
Reaction score
0
"smoke" ring with only air?

Can "smoke" ring be blown with only air (withouth smoke) in cold?
 
Physics news on Phys.org


kompabt said:
Can "smoke" ring be blown with only air (withouth smoke) in cold?

Yes. The water vapor in your exhalation will condense into visible "mist". This mist can be formed into a "ring" with the same "popping" procedure that you use to make a ring with tobacco smoke.

Almost everyone who lives in cold climates has tried this--some with more success than others.
 
Thread 'Gauss' law seems to imply instantaneous electric field'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...
Back
Top