Preserving Milk with Household Items: A Scientific Approach

AI Thread Summary
The discussion revolves around a science project focused on preserving milk using only household items for five days, without chemicals or external power sources. One participant plans to use a cut coke bottle encased in Styrofoam to create an airtight seal, reflecting radiant energy with foil. Suggestions arise regarding the effectiveness of this method, including the idea of using Styrofoam to surround the bottle instead and the possibility of building a homemade thermos. The importance of keeping the milk cold is emphasized, with discussions on using water for insulation and exploring cooling by evaporation. The participant ultimately decides to proceed with their original plan, enhancing it by adding insulation to the top and proposing to test the setup's effectiveness by measuring temperature changes over time.
Ronaldo95163
Messages
77
Reaction score
1
Cheers guys

We were given a science project to preserve the following using only household items for 5 dats...Chemicals may not be used as well as any external power source like an outlet:
Bread
Milk
and a mystery item which would be presented to us on the day.


One of our teammates already opted for the bread so I decided to go for the milk


My plan was to use a coke bottle, something like this:

coca%20cola.jpg


and cut it half way and use the cylindrical part

Then get some Styrofoam

5891679529_6957459ca9.jpg


and carve it in such a way so that I would be able to insert the half of the coke bottle I'm using into it then make a cover out of styrofoam to make an airtight as possible cover for it to prevent air and moisture from getting down into it.

Afterwards then wrap the entire thing with foil to reflect any radiant energy.

What are your thoughts on it?
Would it be able to keep the milk preserved for the given time period?
 
Physics news on Phys.org
why cut the bottle? it would hold the milk far better than the styrofoam and cylinder.

Use the styrofoam to surround the bottle instead.

Can you build a thermos?

Can you use water to surround the bottle?

It seems you'd need to keep the milk cold or create powdered milk...
 
Yes I can build the thermos...it was my idea at first. I sketchy about it because I wasn't sure if a homemade thermos would be able to keep the milk preserved for 5 days
Water can also be used to surround the bottle too..I would have to keep the water in an insulated environment to prevent it from getting warm though
 
Last edited:
have you investigated cooling by evaporation?
 
Sorry for the late reply...I haven't tried that...I went with plan A

This is how it came out:
 

Attachments

  • IMG_20140802_052900788_HDR.jpg
    IMG_20140802_052900788_HDR.jpg
    38.1 KB · Views: 525
  • IMG_20140802_052908435_HDR.jpg
    IMG_20140802_052908435_HDR.jpg
    40.7 KB · Views: 881
  • IMG_20140802_052914530_HDR.jpg
    IMG_20140802_052914530_HDR.jpg
    47.1 KB · Views: 549
  • IMG_20140802_052929451.jpg
    IMG_20140802_052929451.jpg
    39.9 KB · Views: 523
  • IMG_20140802_052935051.jpg
    IMG_20140802_052935051.jpg
    38.4 KB · Views: 537
  • IMG_20140802_052948054_HDR.jpg
    IMG_20140802_052948054_HDR.jpg
    29.7 KB · Views: 509
not bad i'd put some added a styro/foil cap on the top too (insulation is thinner there) to make it a totally wrapped cube and then test to see how long it can keep an ice cube to ice water cold. measure via thermometer same time once a day or once every x hours and plot it out to see cooling loss.
 

Thread 'What are the best A-Level options for someone wanting to do Physics?'

Bit Britain-specific but I was wondering, what's the best path to take for A-Levels out of the following (I know Y10 seems a bit early to be thinking about A-levels, but my choice will impact what I do this year/ in y11) I (almost) definitely want to do physics at University - so keep that in mind... The subjects that I'm almost definitely going to take are Maths, Further Maths and Physics, and I'm taking a fast track programme which means that I'll be taking AS computer science at the end...
View full post »

Thread 'Hepth programs in Europe'

After a year of thought, I decided to adjust my ratio for applying the US/EU(+UK) schools. I mostly focused on the US schools before, but things are getting complex and I found out that Europe is also a good place to study. I found some institutes that have professors with similar interests. But gaining the information is much harder than US schools (like you have to contact professors in advance etc). For your information, I have B.S. in engineering (low GPA: 3.2/4.0) in Asia - one SCI...
View full post »

Thread 'Should I pursue a masters degree after 4.5 years working in IT?'

I graduated with a BSc in Physics in 2020. Since there were limited opportunities in my country (mostly teaching), I decided to improve my programming skills and began working in IT, first as a software engineer and later as a quality assurance engineer, where I’ve now spent about 3 years. While this career path has provided financial stability, I’ve realized that my excitement and passion aren’t really there, unlike what I felt when studying or doing research in physics. Working in IT...
View full post »

Similar threads

The Scientist as Hero - or not
Replies
1
Views
3K

Hot Threads

Recent Insights

Back
Top