Trying to power devices in general aviation aircraft

AI Thread Summary
Powering devices in a Piper Arrow aircraft can be effectively achieved by using the aircraft's 12V power source instead of a 110V inverter, which may not provide sufficient power for multiple devices. The aircraft's standard 60A alternator should be able to support the load if no other systems are drawing power, but upgrading to a higher capacity alternator could enhance performance. Directly connecting devices like a laptop and GPS puck to the 12V source is recommended for efficiency. Using a 1-3 adapter to connect multiple devices to the 12V outlet is a viable option. Ensuring proper connections and considering the total power draw is crucial for reliable operation.
yipk4
Messages
3
Reaction score
0
Hello,

Don't know if anyone out there can help, but thought this would be a good place to ask.

I have a small aircraft (piper arrow) that I would like to run a few devices in while traveling.

These devices include a laptop, a GPS puck (GPS18) and custom unit that retains postions received by the GPS puck. The aircraft has a 12v power source (cigarette adapter). I have tried connecting an inverter to the aircrafts power source, then connecting an iGo to the inverter that powers the laptop. The GPS puck is connected a cigarette adapter run from a power supply connected to the inverter.

I am using a Cobra CPI1550 inverter, 1500 watts continuous and 3000 peak. This doesn't seem to be enough power as either the laptop or the GPS lose power. Or is there possibly an issue in wire connections? I am no electrician and this is just a hobby type thing I'm putting together.
 
Engineering news on Phys.org
yipk4 said:
Hello,

Don't know if anyone out there can help, but thought this would be a good place to ask.

I have a small aircraft (piper arrow) that I would like to run a few devices in while traveling.

These devices include a laptop, a GPS puck (GPS18) and custom unit that retains postions received by the GPS puck. The aircraft has a 12v power source (cigarette adapter). I have tried connecting an inverter to the aircrafts power source, then connecting an iGo to the inverter that powers the laptop. The GPS puck is connected a cigarette adapter run from a power supply connected to the inverter.

I am using a Cobra CPI1550 inverter, 1500 watts continuous and 3000 peak. This doesn't seem to be enough power as either the laptop or the GPS lose power. Or is there possibly an issue in wire connections? I am no electrician and this is just a hobby type thing I'm putting together.

Welcome to the PF.

Why do you need to use a 110Vrms inverter to power those devices? Seems like they should each have a 12Vdc adapter available that can run them off of a car-style plug.
 
Would the single 12v source in the aircraft power the GPS puck, the iGO for the laptop and another 12v source without overloading it? Sorry if I don't make much sense, I will be the first to admit I don't know much about all of this. Thanks for the help!
 
I suppose I could get a 1-3 adapter to plug all devices into the 12v aircraft source...I have yet to try that
 
yipk4 said:
Would the single 12v source in the aircraft power the GPS puck, the iGO for the laptop and another 12v source without overloading it?

If it won't, then connecting it to a 1500W/3000W inverter will ABSOLUTELY not work. The Piper Arrow comes standard with a 60A alternator, this should be sufficient to power your inverter (~30A max), if there is no other load (Lights, radios, etc), but it would be FAR MORE efficient to directly power your devices from the 12V source.

A quick google on the Arrow's charging system suggests many owners have chosen to upgrade their alternators to 75A-100A versions. You might consider this next time the alternator maintenance comes up on your check list.

Fish
 
Last edited:
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Back
Top