Tuning anapole resonator question

  • Thread starter yefj
  • Start date
2 replies · 2K views · last reply
yefj
Messages
166
Reaction score
2
Hello , I have designed an anapole resonator which works great at 10GHZ,With the mode shown below.
However when I try to increase the frequency of this mode by decreasing the inner circle it didnt went so well.
Video is attached ,could you please help me understand how to increase the frequency of this mode and increase its coupling?
Thanks.
2025-08-20 10-19-52.mkv
Simulation screenshot of a planar resonator on a cyan substrate with a microstrip line crossing it; a yellow square patch has a circular aperture containing a central disc split by a slot, with axis arrows labeled u, v, w and a scale marking of 0.03 mm.

S-parameter magnitude plot, S1,1 in dB against frequency from 10 to 26 GHz, with two resonance dips: about -0.8 dB at 11 GHz, -5.3 dB at 12.55 GHz, and -9.2 dB at 20.75 GHz.

CST simulation screenshot of the H-field magnitude at 20.882 GHz on a ground plane, with a red-outlined probe region on the right edge, a central ring-shaped resonator, and a colour scale in A/m from 4.07e-05 to 612.
 
I was wondering if you could briefly describe for us the operation of the device. Thank you.
 
Hello tech99,I made a video for you explaining the situation.
I just can find a good way to increase frequency all methods are barely increasing the frequency .
Thanks.

2025-08-27 08-15-49.mkv