Variable frequency drive for high speed spindle

AI Thread Summary
The discussion focuses on the compatibility of a variable frequency drive (VFD) with a new high-speed spindle for a CNC router table. The current VFD, LS Industrial Systems - Starvert SV008IC5-1F, can handle up to 400Hz but is rated for a maximum output of 0.75kW, while the new spindle requires 1kW. Users suggest that the existing VFD may not be suitable for the new spindle due to this power discrepancy. It is recommended to consider upgrading to a larger model, such as the SV015IC5-1F, to ensure proper functionality. Understanding the specifications of both the VFD and spindle is crucial for optimal performance.
Icestation2
Messages
3
Reaction score
0
I operate a CNC router table with a high speed spindle. I'm looking to upgrade to a new spindle but need to know if the variable frequency drive I currently have will work with this new spindle.

The new spindle has the following stats: 300Hz, 1kw, 18000RPM.

The frequency drive is made by LS Industrial Systems - Starvert SV008IC5-1F

The info on their website suggests that this particular drive can reach 400HZ, but I’m not sure about the other details, especially whether or not 1kw is too high.

More info is available using this link:

http://eng.lsis.biz/product/product/introduce/ecatalog_viewStream.asp?catalog_id=288&fileNum=1

Any advice would be welcome.
 
Last edited by a moderator:
Engineering news on Phys.org
Cool to see another CNC person here, I've did my own X2 CNC Mill conversion recently.

The "008" of "SV008IC5-1F" says it's 0.75 kw time to upgrade to get those faster IPM speeds.

btw have you tried CNCzone.com before, people there are good at answering CNC stuffs like this.
 
I'm wondering if the 0.75KW motor rating - as shown in the PDF manual - relates to the motor within the frequency drive, and not it's output. Does anyone know if a frequency drive has a motor? My knowledge of these devices is quite poor.
 
Icestation2 said:
I'm wondering if the 0.75KW motor rating - as shown in the PDF manual - relates to the motor within the frequency drive, and not it's output. Does anyone know if a frequency drive has a motor? My knowledge of these devices is quite poor.
The specs indicate the rating for the motor being driven. Looks like the model you are considering (SV008IC5-1F) would drive a 1 HP (0.75kW) load. If your spindle motor is rated at 1kW then I would consider something a little larger; maybe the SV015IC5-1F.
 

Thread 'How might electronics be different if AC voltage was 72V at 45 Hz?'

Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
View full post »

Thread 'Why does the amperage go real high if there is a low voltage short?'

I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
View full post »
Thread 'Electromagnet magnetic field issue'

Thread 'Electromagnet magnetic field issue'

Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
View full post »

Similar threads

Variable Frequency Drive vs. Servo Drive
Replies
3
Views
12K
Can Variable Frequency Drives Control Both Speed and Torque Simultaneously?
Replies
2
Views
2K
Federal A/C Unit Efficiency Standard Up
Replies
1
Views
5K
Programs Math minor, double major, and elective classes advice
Replies
4
Views
3K
Hydrogen-boron High Density Plasma Toroid Fusion
Replies
3
Views
4K

Hot Threads

Recent Insights

Back
Top