Visualize Electromagnetic Fields from Dipole Antennas

AI Thread Summary
A real-time web-based simulation has been developed to visualize the electric and magnetic fields radiated by dipole antennas. Users are experiencing access issues due to an "unmatching security certificate" on the original link. The creator acknowledges the problem and believes it has been addressed. A new link has been provided for better access to the simulation. The discussion highlights the importance of resolving security certificate issues for user accessibility.
Rotem Tsafrir
Messages
5
Reaction score
5
TL;DR Summary
Hey everyone!
I recently built a real-time web-based simulation to help visualize the electric and magnetic fields radiated by dipole antennas:

https://antennasim.com


The simulation lets you:

• Add multiple dipole antennas anywhere on the canvas

• Set antenna phase and frequency

• Visualize the E-field, B-field, and Poynting vector in 2D

• Observe near-field and far-field interactions
1753042468221.webp
 
Engineering news on Phys.org
Rotem Tsafrir said:
I recently built a real-time web-based simulation to help visualize the electric and magnetic fields radiated by dipole antennas:
My web protection software blocks access to your link because it has an "unmatching security certificate".
 
  • Like
Likes Rotem Tsafrir
renormalize said:
My web protection software blocks access to your link because it has an "unmatching security certificate".
Yeah, I'm getting the same error/warning.

1753046093805.webp
 
  • Like
Likes Rotem Tsafrir
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...

Similar threads

Back
Top