What are the Common Causes of Power Line Noise?

  • Thread starter Thread starter 54stickers
  • Start date Start date
  • Tags Tags
    Line Noise Power
AI Thread Summary
Power line noise is primarily caused by the discharge of energy when the electrical field strength exceeds the air's breakdown strength around the conductor, leading to phenomena like corona loss and radio noise. Additionally, moisture buildup on insulators can create momentary noises, particularly on humid nights. The ticking sounds observed under high-voltage lines can be attributed to these electrical discharges and environmental factors. Understanding these causes helps clarify the nature of the noises associated with power lines. Overall, both electrical and atmospheric conditions play significant roles in the sounds emitted by high-voltage power lines.
54stickers
Messages
28
Reaction score
0
Hello, So I have a question about electric power lines.

Today I was under some large power lines and I noticed some ticking noises. I had never noticed this noise before and was curious

I thought maybe the current flowing through the lines was too great, and the lines were arcing
to each other. but that seems silly.

Could anyone help me out? thanks!

Note: they were the large lines that run through the large metal tower structure, not the ones along the road... If that changes anything.
 
Physics news on Phys.org
What causes the noise emitted from high-voltage power lines--is it static discharge, vibration from the 60-cycle field or something else entirely?

Robert Dent, president of the IEEE Power Engineering Society, responds:

"The audible noise emitted from high-voltage lines is caused by the discharge of energy that occurs when the electrical field strength on the conductor surface is greater than the 'breakdown strength' (the field intensity necessary to start a flow of electric current) of the air surrounding the conductor. This discharge is also responsible for radio noise, a visible glow of light near the conductor, an energy loss known as corona loss and other phenomena associated with high-voltage lines."

http://www.scientificamerican.com/article.cfm?id=what-causes-the-noise-emi
 
Makes sense, thanks!
 
Hello,

I have another explanation, as well. On humid days, the buildup of moisture on the insulators can cause a momentary Bzzt noise as current is momentarily carried.

I've noticed this most often at night as sea breazes blow in. It's a bit odd in that you never know quite when to expect it or from which direction.
 
I have recently been really interested in the derivation of Hamiltons Principle. On my research I found that with the term ##m \cdot \frac{d}{dt} (\frac{dr}{dt} \cdot \delta r) = 0## (1) one may derivate ##\delta \int (T - V) dt = 0## (2). The derivation itself I understood quiet good, but what I don't understand is where the equation (1) came from, because in my research it was just given and not derived from anywhere. Does anybody know where (1) comes from or why from it the...

Similar threads

Back
Top