What is the relationship between pipes and temperature?

  • Thread starter Thread starter deynak
  • Start date Start date
  • Tags Tags
    Pipes Temperature
AI Thread Summary
The discussion focuses on the relationship between pipes and temperature, specifically regarding the thermal expansion of a 10 km highway after passing pipes with hot water. Participants express confusion over the problem statement and seek clarification on the meaning of "after passing pipes with hot water." The relevant equation for calculating the change in length due to temperature is provided, emphasizing the need for assumptions about the linear expansion coefficient and temperature difference. One participant successfully solved the problem using reasonable assumptions. The conversation highlights the importance of clear problem statements in physics-related discussions.
deynak
Messages
2
Reaction score
0
Homework Statement
By how much can a 10 km highway lengthen after passing pipes with hot water?
a) 100m; b) 50m; c) 25m; d) 10m.
Relevant Equations
ΔL = L x a x ΔT
ΔL = total change in the length of the pipe [mm]
L = original pipe length [m]
a = linear expansion coefficient
ΔT = difference in temperature [°C]
It seems for me that something is missing on the question. Actually, I do not know where to start.
 
Physics news on Phys.org
You have provided a relevant equation. What do you need to know to answer the question using it? If it is not given to you, make some reasonable assumptions and/or look up any values you need to know.
 
deynak said:
Problem Statement: By how much can a 10 km highway lengthen after passing pipes with hot water?
a) 100m; b) 50m; c) 25m; d) 10m.
Relevant Equations: ΔL = L x a x ΔT
ΔL = total change in the length of the pipe [mm]
L = original pipe length [m]
a = linear expansion coefficient
ΔT = difference in temperature [°C]

It seems for me that something is missing on the question. Actually, I do not know where to start.
Is this really the exact statement of the problem? What does "after passing pipes with hot water" even mean?
 
Solved it! I used some assumptions for linear expansion coefficient .
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top