What is the Scariest Thing You Did Today? Facing Fear and Building Confidence

  • Thread starter Thread starter lisab
  • Start date Start date
  • Tags Tags
    Thread
AI Thread Summary
The discussion centers around the idea of facing fears and trying new things, inspired by a quote often attributed to Eleanor Roosevelt. Participants share personal experiences of confronting fears, such as woodworking on a lathe, studying for exams, and navigating tricky driving situations. One user recounts the thrill and danger of turning wood, while another humorously reflects on the fear of encountering spoiled food in the fridge. There are anecdotes about past accidents with tools and the challenges of driving, emphasizing the importance of caution and learning from experiences. The conversation highlights the balance between fear and confidence, with participants encouraging each other to embrace challenges and learn from mistakes. Overall, the thread captures a light-hearted yet insightful exploration of daily fears and personal growth.
lisab
Staff Emeritus
Science Advisor
Gold Member
Messages
2,026
Reaction score
623
Do one thing every day that scares you.

--Eleanor Roosevelt

Well she's often given credit for that quote, but what she actually said was,

You gain strength, courage, and confidence by every experience in which you really stop to look fear in the face.

You are able to say to yourself, “I lived through this horror. I can take the next thing that comes along.”

The danger lies in refusing to face the fear, in not daring to come to grips with it. If you fail anywhere along the line it will take away your confidence. You must make yourself succeed every time. You must do the thing you think you cannot do.

Meh, close enough.

Today, I turned wood on a lathe. It was from a stump of a plum tree that was in our yard (just goes to show you that if you're a tree in our yard, you better make decent fruit!). It's scary because the tool can get away from you and get flung across the room, or you can get tangled up in the lathe. Both of those are bad, bad things but the second one is probably worse. Neither happened today, and tomorrow I will finish my first wood bowl.

So what did you do today that scared you?
 
Physics news on Phys.org
Stuided for exams.
 
Student100 said:
Stuided for exams.

Isn't taking them scarier?
 
Drove the wrong way down a small road near a mall around Saturday rush hour (6-8pm) to bypass the slow southerners.

Actually it was kind of fun. You see, North Carolina didn't receive the Model T until 2006, so they are still learning.

To reward myself I went and cooked a steak and shrimp dinner with mashed potatoes.
 
Went outside.
 
lisab said:
Today, I turned wood on a lathe ...

Congratulations. Careful the bug doesn't bite you. It's said that a wood turner is someone who keeps a picture of their lathe and lathe tools in their wallet ... right there where the money used to be. :smile:

If you're interested in exotic woods (well, domestic too), check out

www.hobbithouseinc.com/personal/woodpics
 
Isn't taking them scarier?

I fear you may be right.
 
I didn't do anything scary today. Maybe later.

However, I was once attacked by a metal lathe. I had to get two stitches in my lower lip. Before it happened I had no fear of lathes whatever. I think you're better off starting out skittish and careful around them. Same goes for all power tools, and some house cats.
 
Drove my car.
 
  • #10
Jumped off a 4ft high ledge to retrieve a kids helium balloon. Scared I was either going to not get the balloon and look like an idiot in front of a roomful of people and/or fall and break a leg.
 
  • #11
Gad said:
Drove my car.

Probably the riskiest thing I do in an ordinary day :eek:.
 
  • #12
trollcast said:
Jumped off a 4ft high ledge to retrieve a kids helium balloon. Scared I was either going to not get the balloon and look like an idiot in front of a roomful of people and/or fall and break a leg.

So...did you get it?
 
  • #13
zoobyshoe said:
I didn't do anything scary today. Maybe later.

However, I was once attacked by a metal lathe. I had to get two stitches in my lower lip. Before it happened I had no fear of lathes whatever. I think you're better off starting out skittish and careful around them. Same goes for all power tools, and some house cats.

Honestly I was extremely skittish. I've never seen a tool get thrown by a lathe but I'm familiar with the laws of physics.

Cats...well you take your chances and hope for the best. Problem is, I adore them and they know it.
 
  • #14
lisab said:
So...did you get it?

Yeah and I didn't faceplace into the floor or fall over when I landed either.
 
  • #15
Scariest thing so far was looking into the mirror. But it is just 10 a.m. on a slow Sunday.
 
  • #16
so far, opened the fridge to see what`s living and growing in there.
 
  • #17
Drank spoiled milk
 
  • #18
Got to agree, looking into the fridge is my scariest daily activity.
 
  • #19
I am scared that I will see my mother again.
I am scared to lead my life without the Internet and I am afraid I will one lose all of PFers all at once.
Many of you sound to me very familiar and nice although I just never met you.
 
  • #20
Lol!
 
  • #21
OK so today I tried to hollow out the inside of my bowl. YIKES! I kicked that bowl's butt yesterday, but today it won.

Bowl 1, Me 1.

You just wait, bowl. This isn't over!
 
  • #22
A couple years ago I got into watching YouTubes of people turning stuff on pole lathes. This technology probably goes back to extremely ancient times, though the first lathes were more likely bow lathes. Anyway, I've always wanted to try it.

 
Last edited by a moderator:
  • #23
I didn't do anything scary today. :(
 
  • #24
zoobyshoe said:
A couple years ago I got into watching YouTubes of people turning stuff on pole lathes. This technology probably goes back to extremely ancient times, though the first lathes were more likely bow lathes. Anyway, I've always wanted to try it.



That was very enjoyable, thanks for posting it!

I made good progress this evening, I had more confidence and I was relaxed. But towards the end...I don't know what happened, I miscalculated the distance to the surface. I'm finding it's hard to really judge where the surface is when it's spinning. So I had what's called a "catch". The gouge dug in too hard, the tool jerked, and the bowl wedged loose from its chuck. It didn't fly, though, so I managed to turn the lathe off.

Everything was OK, the bowl had a deep "valley" but it was salvageable. And the tool didn't fly either...whew.
 
Last edited by a moderator:
  • #25
Tonight I wanted to take a right turn on a cross section, and ended up driving in the opposite way lane, once I noticed the yellow lines I swift to the right lane. If there were any car, I would've crash into it. The horror. :cry:
 
  • #26
Where have you learned to drive, in UK? I know such things like landing on the wrong line after turn happen to people who have to switch from driving on the left to driving on the right (or vice versa).
 
  • #27
Me: turn right- talking to my brother while pointing to the left.
My brother: left you mean?
Me: no, right- again pointing to the left.
My brother: do you want me to take the right or the left??
Me: I said right, DAMN LEFT I MEAN!


It's in the mind, Borek. Happens often when I'm deeply thinking about something, that's why it's scary to drive, cause it's impossible for me not to think.

Edit: The dialogue above occurred in another instant showing the same problem of confusing right for left and vice versa.
 
Last edited:
  • #28
Remind me never to drive when you're on the same continent, Gad.
 
  • #29
ted_cruz2.jpg
 
  • #30
Obama-smile.jpg


Edit: Here I thought I was on the Random Thoughts thread. Sorry about that
SW VandeCarr. That is scary.
 
Last edited:

Similar threads

Replies
33
Views
6K
Replies
1
Views
8K
Replies
4
Views
4K
Replies
9
Views
5K
Replies
7
Views
4K
Replies
49
Views
7K
Replies
5
Views
4K
Back
Top