Where can I find examples of energy band diagrams for semiconductor devices?

AI Thread Summary
Resources for learning to draw energy band diagrams for semiconductor devices, including pn-diodes, Schottky diodes, and MOSFETs, are sought after in this discussion. Users are looking for online materials that explain energy levels and their representations under different conditions, such as applied voltages and inversion. A suggested link to a resource from the University of Colorado provides relevant information. The focus is on understanding the diagrams in various scenarios to aid in studying semiconductor devices. Comprehensive online guides can enhance learning in this area.
Inertigratus
Messages
123
Reaction score
0
Hi,

I'm studying for a course in semiconductor devices, involving pn-diodes, schottky-diodes and mosfet transistors. Just wondering if there's any good online resource that demonstrates specifically how to draw energy band diagrams for the various devices in various situations (applied voltages, inversion, accumulation etc). How to draw the various energy levels and what they represent and so on. That would be helpful!

Thanks!
 
Engineering news on Phys.org
Nothing?
 
Google something. You might like:

http://ecee.colorado.edu/~bart/book/book/chapter2/ch2_3.htm#2_3_3
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Semiconductors - Flat band Diagram vs Equilibrium Diagram
Replies
3
Views
4K
Why Does the Metal Fermi Level Remain Constant in Schottky Barriers?
Replies
1
Views
20K
How does band bending occur in energy band diagrams?
Replies
7
Views
12K
I Built-in potential in pn junction
Replies
2
Views
4K
Step PN Junction - Energy Band Diagram
Replies
1
Views
15K
Engineering I’m having second thoughts about my job position. How can I proceed with it?
Replies
13
Views
5K
Model Pulley: Understanding System Physics
Replies
27
Views
10K
Could New Materials Propel China's Industry to Bill Gates-Level Success?
Replies
4
Views
10K
How can I effectively study for multiple subjects in a limited amount of time?
Replies
8
Views
4K
PF Fan Fiction: Mathematicians in Love
Replies
2
Views
4K

Hot Threads

Recent Insights

Back
Top