Why do some lakes have a concave surface before water falls over a weir?

  • Thread starter Thread starter Rothiemurchus
  • Start date Start date
  • Tags Tags
    Falling Water
AI Thread Summary
The concave surface of some lakes before water flows over a weir is primarily due to adhesion and surface tension. As deeper water molecules move over the edge first, the surface layers attempt to maintain their original configuration, creating a concave shape. This phenomenon is similar to how surface layers of water cling to objects, like a ring, when removed from the water. Adding detergent disrupts surface tension, causing the concave shape to temporarily disappear. Understanding these principles can help explain fluid behavior in various contexts.
Rothiemurchus
Messages
203
Reaction score
1
Why does the surface of some lakes become concave just before the water falls over a weir?
 
Physics news on Phys.org
Rothiemurchus said:
Why does the surface of some lakes become concave just before the water falls over a weir?

Two words : adhesion and surface tension... :wink:

The deeper watermolecules will fall over first, then the top layers of the water. the reason for this is that the surface will always try to maintain or restore the original configuration once some perturbation has occured...
Think of what would happen if you would slowly move a ring out of water. the surface-layers will try to stick to the rings...they want the ring to stay in the water and thus maintain the original configuration. These things are used in experiments to measure the surface tension of fluids in general...

marlon
 
If I dropped some detergent on the surface the concave shape would disappear briefly?
 

Thread '1:1 versus 2:1 Mechanical Advantage debate'

The rope is tied into the person (the load of 200 pounds) and the rope goes up from the person to a fixed pulley and back down to his hands. He hauls the rope to suspend himself in the air. What is the mechanical advantage of the system? The person will indeed only have to lift half of his body weight (roughly 100 pounds) because he now lessened the load by that same amount. This APPEARS to be a 2:1 because he can hold himself with half the force, but my question is: is that mechanical...
View full post »

Thread 'Newton's first law?'

Some physics textbook writer told me that Newton's first law applies only on bodies that feel no interactions at all. He said that if a body is on rest or moves in constant velocity, there is no external force acting on it. But I have heard another form of the law that says the net force acting on a body must be zero. This means there is interactions involved after all. So which one is correct?
View full post »
Thread 'Beam on an inclined plane'

Thread 'Beam on an inclined plane'

Hello! I have a question regarding a beam on an inclined plane. I was considering a beam resting on two supports attached to an inclined plane. I was almost sure that the lower support must be more loaded. My imagination about this problem is shown in the picture below. Here is how I wrote the condition of equilibrium forces: $$ \begin{cases} F_{g\parallel}=F_{t1}+F_{t2}, \\ F_{g\perp}=F_{r1}+F_{r2} \end{cases}. $$ On the other hand...
View full post »

Similar threads

I Collision when a falling tank impacts the surface of a lake
Replies
7
Views
2K
Superionic and metallic states of water and the Anomaly of Water
Replies
1
Views
1K
Does a strong wind slow down your free fall?
Replies
9
Views
3K
What happens when you fall at 100 mph into a flat water lake
Replies
12
Views
9K
Oil-Water-Salt - What's the force at work here?
Replies
5
Views
17K
Survive falling into water. Calm vs Disturbed
Replies
14
Views
2K
Surface Tension - Using hot soapy water to wash clothes
Replies
1
Views
2K
I When Water acts like Glue (flat surfaces)
Replies
18
Views
3K
Can a glass of water be filled to its edge?
Replies
42
Views
6K
Lake Hydrology Physics: Observing Shoreline Changes
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top