Why do throat mics almost always have 2 elements?

  • Thread starter Thread starter theycallmevirgo
  • Start date Start date
  • Tags Tags
    Elements
AI Thread Summary
Throat mics typically feature two transducers to enhance sound capture and reduce ambient noise. The dual elements likely operate in a configuration that allows for noise cancellation, where one transducer picks up the user's voice while the other captures surrounding sounds. This setup helps isolate vocal signals from background noise, although some argue that noise cancellation may not be essential. The thicker skin at the throat compared to eardrums suggests that throat mics function more as vibration sensors than traditional microphones. Overall, the design aims to improve clarity in communication, especially in noisy environments.
theycallmevirgo
Messages
108
Reaction score
25
Most things like this

https://www.coderedheadsets.com/Assault-MOD-Waterproof-Tactical-Throat-Mic-p/assault-mod-wp.htm

generally have 2 transducers. Why? If for phased array noise cancellation, can someone give a broad outline of the "summing" circuit?
 
Engineering news on Phys.org
I would guess that the two transducers are connected in series opposition. As both are subject to ambient noise, it will be cancelled. But only one transcuder is coupled to the vocal cords, to that signal is not cancelled.
 
  • Like
Likes theycallmevirgo
Try this search. Noise cancelling does not seem to be needed.The skin at the throat being much thicker than the eardrums, likely doesn't vibrate nearly as much... and some sites describe a throat mic as a vibration sensor.

https://www.google.com/search?&q=throat+mics
 
  • Like
Likes theycallmevirgo
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...

Similar threads

Back
Top