Why does ice grow in the freezer rather than evaporate?

  • Thread starter Thread starter Norway
  • Start date Start date
  • Tags Tags
    Humidity Ice
AI Thread Summary
Frost builds up in freezers due to the process of sublimation, where ice can evaporate even at negative temperatures. When warm, humid air enters the freezer, it cools and can become super-saturated with water vapor, leading to frost formation. The temperature of surfaces like the evaporator coil is lower than the surrounding air, causing water vapor to condense and freeze. Additionally, the phase separation between ice and vapor is influenced by the total amount of water molecules present, meaning higher humidity results in more ice formation. Understanding the relationship between temperature, humidity, and vapor pressure is key to grasping why frost accumulates in freezers.
Norway
Messages
50
Reaction score
3
Hi!
I hope I put this in the right place. I apologize if I didn't.

We we're having a discussion here, as to why frost builds up in the freezer.

The discussion has been something like this:

Guy 1:

The water in this room temperature bowl will weigh less and less over time. This is because as long as it's not below zero degrees Celsius, the water will evaporate.

Me:
That's right. It actually does evaporate even below zero degrees aswell, known as sublimation. If you have a tray of ice cubes in your freezer, you'll see that it shrinks over the months/years. The hotter the water is, the faster it evaporates, but even at negative temperatures, it will evaporate.

Guy 2:
If the water is frozen and the humidity is high, then the ice will attract the water and freeze it. So the ice will grow in negative temperatures regardless of the humidity. Just check your freezer.

Me (being on thin ice (ba-dum-ts), realizing my freezer does grow ice):
That requires satured air (ie 100 % humidity). If the air isn't saturated, then the ice will evaporate, rather than grow.

Guy 2:
Hmm. That doesn't make sense. Can you explain to me why frost grows on my windshield and why you get frost on a beer glass you've had in the freezer, even though the relative humidity is below 50 %?

... so now I'm trying to figure out how this actually works. I found this meteorological explanation, but I don't really understand how the relation between the dew/frost point and relative humidity work, and I don't really understand the formation of frost when the air isn't saturated. I have also of course read the Wikipedia articles on dew point, frost point, relative humidity and deposition, without really understanding it all. Can you help me bring this discussion back on track? :D

Thank you!
 
Physics news on Phys.org
Seems that I have read that to find the dewpoint something like a mirror is cooled until a reflected beam of light
decreases in intensity.
That should explain the frost on a beer glass.
It does appear that frost will appear on a windshield before the rest of the car. But you also have to consider that
1 gram of water has to give up 80 calories of heat before it can turn to ice.
 
In equilibrium thermodynamics, this is a phase separation between the two. I don't know your level of knowledge in thermodynamics, but to start with in common English, below certain temperature (freezing point) where there is a phase separation, the amounts of the two phases (ice and vapour) are determined by the total amount of the material (water molecules), i.e. more humid, more ice would form.

Wind shield is not in thermal equilibrium which is way more complicated. But let us assume in the vicinity of the glass there the layer of air is quenched to an equilibrium system below the transition temperature. Apparently, immediately after quenching, there is no ice phase at all; then, vapour phase definitely would like to go into ice phase.
 
Even if the relative humidity is 50% in the room temperature air, the surface of the glass is at a much lower temperature, and, if the air were at that temperature, its relative humidity would be greater than 100%. Don't forget that the relative humidity is defined as the partial pressure of the water vapor in the air divided by the equilibrium vapor pressure of water vapor at the prevailing temperature. The glass cools the air right next to it to the point where the relative humidity of that air is at or above 100%. This allows the water vapor to condense onto the glass surface.

Chet
 
Every time you open the freezer, you mix the air with the humid air in your house. Warmer air can hold more water, so when the house air gets cooled by your freezer, it becomes super-saturated with water and it frosts. If you somehow remove humidity from your freezer, then ice will sublime. But the humidity doesn't really have anywhere to go, unless you fill your freezer with water-absorbing materials. (That's one way to freeze dry things at home.)
 
The vapor pressure of -20C ice is very low- only 1 mbar (100 Pa)- so the sublimation rate is very low. Frost builds up on the evaporator coil (and surfaces near it) because it is at a lower temperature than -20C, and so water vapor from the warm exterior air which enters the freezer by opening the door preferentially condenses on it.

http://www.appliancerepair.net/refrigerator-repair-1.html
 
Thread 'Is there a white hole inside every black hole?'
This is what I am thinking. How much feasible is it? There is a white hole inside every black hole The white hole spits mass/energy out continuously The mass/energy that is spit out of a white hole drops back into it eventually. This is because of extreme space time curvature around the white hole Ironically this extreme space time curvature of the space around a white hole is caused by the huge mass/energy packed in the white hole Because of continuously spitting mass/energy which keeps...
Back
Top