Why is Diffusion Called a Second Rank Tensor Variable?

  • Thread starter Thread starter xfshi2000
  • Start date Start date
  • Tags Tags
    Diffusion Tensor
AI Thread Summary
Diffusion is classified as a second rank tensor variable because it describes the relationship between input and output vectors, particularly in anisotropic materials where diffusivity varies by location and direction. The diffusion tensor, initially developed for colloidal solutions and now utilized in MRI, captures this complexity. Diagonal components of the diffusion tensor represent translational diffusivities, while off-diagonal components indicate cross-directional flux due to concentration gradients. Each component of the diffusion tensor matrix corresponds to an apparent diffusion coefficient, which can be transformed into true diffusion coefficients through eigenvalue calculations. Understanding these components is crucial for accurately modeling diffusion processes in various materials.
xfshi2000
Messages
30
Reaction score
0
Hi all:
Does anyone explain why we call diffusion as the second rank tensor variable? I understand Based on the tensor definition, we know tensor expresses the relationship between input vector and output vector. How about diffusion? what is its input vector? what is its output vector? thanks in advance

xf
 
Physics news on Phys.org
The diffusion tensor (or the related Oseen mobility tensor) are used to allow the material to be anisotropic. The diffusivity varies with location and direction.

The current use of diffusion tensor comes from MRI (diffusion tensor imaging), but the concept was developed for colloidal solutions.
 
Andy Resnick said:
The diffusion tensor (or the related Oseen mobility tensor) are used to allow the material to be anisotropic. The diffusivity varies with location and direction.

The current use of diffusion tensor comes from MRI (diffusion tensor imaging), but the concept was developed for colloidal solutions.

Thank you. Could you tell me what the meaning of each component of diffusion tensor matrix is ? For example, what do off-diagonal terms represent? What do diagonal terms represent?
thanks
 
The diagonal components are translational diffusivities/mobilities. I think the off-diagonal components correspond to rotational mobility/diffusion.
 
Thanks. I do not really understand your answer. After I search the internet and get some explanation, for diffusion tensor matrix, each component of matrix represents an apparent diffusion coefficient. These diffusion coefficient are not real diffusion coefficient. After we calculate the eigenvalue of the matrix, we can get true and objective diffusion coefficient which is independent of coordinate frame selection. I am not sure these explanations are correct or not. Anyway thank you. Andy Resnick

xf
 
The diagonal components represent flux in some direction caused by a concentration gradient in that same direction. The off-diagonal components represent flux in some direction caused by a concentration gradient in another direction (which is less intuitive).
 
Thread ''splain this hydrostatic paradox in tiny words'

Thread ''splain this hydrostatic paradox in tiny words'

This is (ostensibly) not a trick shot or video*. The scale was balanced before any blue water was added. 550mL of blue water was added to the left side. only 60mL of water needed to be added to the right side to re-balance the scale. Apparently, the scale will balance when the height of the two columns is equal. The left side of the scale only feels the weight of the column above the lower "tail" of the funnel (i.e. 60mL). So where does the weight of the remaining (550-60=) 490mL go...
View full post »

Thread 'The Effect of Linear and Rotational Motion on Measured Weight'

Consider an extremely long and perfectly calibrated scale. A car with a mass of 1000 kg is placed on it, and the scale registers this weight accurately. Now, suppose the car begins to move, reaching very high speeds. Neglecting air resistance and rolling friction, if the car attains, for example, a velocity of 500 km/h, will the scale still indicate a weight corresponding to 1000 kg, or will the measured value decrease as a result of the motion? In a second scenario, imagine a person with a...
View full post »

Thread 'Coulomb gauge implies instantaneous radial electric field?'

Scalar and vector potentials in Coulomb gauge Assume Coulomb gauge so that $$\nabla \cdot \mathbf{A}=0.\tag{1}$$ The scalar potential ##\phi## is described by Poisson's equation $$\nabla^2 \phi = -\frac{\rho}{\varepsilon_0}\tag{2}$$ which has the instantaneous general solution given by $$\phi(\mathbf{r},t)=\frac{1}{4\pi\varepsilon_0}\int \frac{\rho(\mathbf{r}',t)}{|\mathbf{r}-\mathbf{r}'|}d^3r'.\tag{3}$$ In Coulomb gauge the vector potential ##\mathbf{A}## is given by...
View full post »

Similar threads

I Is the Cauchy stress tensor really a tensor?
Replies
8
Views
2K
I Definition of inertia tensor from a differential geometry viewpoint
Replies
15
Views
2K
A Function expansion in Cartesian and spherical tensors
Replies
1
Views
1K
A Understanding Ohm and Hall Diffusion in Cosmic Rays
Replies
1
Views
2K
A Question on Drift-Diffusion Equation
Replies
6
Views
2K
I How can concentration gradient field come into existence immediately?
Replies
1
Views
3K
I Terminologies used to describe tensor product of vector spaces
Replies
7
Views
3K
I How deep does it need to go for a physics theory to be consistent?
2
Replies
50
Views
3K
I Why is the Cross Product Used in Mathematics? Understanding its Role and History
Replies
21
Views
3K
I How to calculate basis vectors from metric tensor (as a matrix)?
Replies
6
Views
463

Hot Threads

Recent Insights

Back
Top