Why Isn't There More Current in Reverse Diode?

AI Thread Summary
In a reverse-biased diode, the depletion region widens due to the lack of charge carriers, acting as an insulator and preventing significant current flow. When a negative voltage is applied, electrons from the n-type material are attracted to the positive terminal, while holes from the p-type material move towards the negative terminal, further widening the depletion zone. This results in minimal current, known as reverse leakage current, which consists of minority carriers crossing the junction. The overall effect is that the diode behaves like a capacitor, with a very small current present under reverse bias conditions. Understanding these dynamics clarifies why substantial current does not flow in reverse-biased diodes.
gracy
Messages
2,486
Reaction score
83
I am not getting why there can't be (or very negligible )current in reverse diode.According to this image
upload_2014-12-13_15-3-51.png

positive terminal of battery would suck electrons from n-type and pass them to negative terminal of battery.And Negative terminal would provide electrons to p type and from there we can see in image force on electrons is opposite to electric field so electrons can easily pass the barrier and can go to n-type and hence complete the circuit(i.e initially electrons were sucked from n-type and lastly they go towards n-type)So in this way in reverse diode also there is sufficient (in good amount)current available.
Where am i going wrong?
 

Attachments

  • upload_2014-12-13_14-55-25.png
    upload_2014-12-13_14-55-25.png
    11.2 KB · Views: 522
Physics news on Phys.org
I think you need to look at what happens in the depletion zone. Not sure. (It's very late and I'm tired.)
 
Drakkith said:
I think you need to look at what happens in the depletion zone. Not sure. (It's very late and I'm tired.)
I have tried my best to look at all aspects.No ,matter whenever you feel comfortable ,you can answer.Please ..but do explain me this.
 
With no voltage applied there is a thin depletion region at the junction. This has very few charge carriers so it acts like an insulator preventing current flow.

...Negative terminal would provide electrons to p type

If you inject more electrons into the p-type you reduce the number of holes even more and the depletion region gets wider. You also get a build up of negative charge near the junction that eventually matches the applied voltage preventing further electrons from flowing into the p-type. In this mode the diode behaves a bit like a capacitor.

Perhaps see..
http://www.science-campus.com/engineering/electronics/semiconductor_theory/diode_2.html
 
One important thing you must know is we say current to flow in diode iff any charge carriers "cross the junction"between p and n.

1)ē are majority in N and holes in P.
2)-ve terminal is connected to P. So it will attract holes from P side . result: holes will move away from junction and get collected in -ve terminal
3)ē will too move away from junction to the +ve terminal there in N side.
4)these two will cause widening of depletion region as majority charge carriers move sideways .
Now ur concept of small current is true . its called reverse leakage current . minority ē in P and minority holes in N will cross junction resulting in current .
 
Back
Top