Wildfire 2.0 (pro engineer) tutorials

Click For Summary
SUMMARY

The discussion focuses on the need for effective learning resources for Wildfire 2.0, a version of Pro/ENGINEER (Pro-E). Users express difficulty finding clear tutorials and recommend a book by Roger Toogood, which is noted for its step-by-step approach. The book, published in 2000, has been helpful for users transitioning from SolidWorks to Wildfire 2.0. Participants suggest purchasing the book from Amazon for better guidance.

PREREQUISITES
  • Familiarity with SolidWorks software
  • Basic understanding of CAD (Computer-Aided Design) principles
  • Knowledge of Pro/ENGINEER interface and functionalities
  • Access to online book retailers like Amazon
NEXT STEPS
  • Research additional tutorials specifically for Wildfire 2.0
  • Explore other books by Roger Toogood on Pro/ENGINEER
  • Learn about the differences between SolidWorks and Pro/ENGINEER
  • Investigate online forums for user-shared resources and tips on Wildfire 2.0
USEFUL FOR

Mechanical engineers, CAD designers, and anyone transitioning from SolidWorks to Pro/ENGINEER Wildfire 2.0 will benefit from this discussion.

boaz
Messages
36
Reaction score
0
i know some stuff in solidworks. however, the place ,where i am going to work, is using wildfire 2 and they've asked me to start studying it. unfortunately, most of the tutorials that i have found using google are not clear. therefore, if you know a good tutorial or a good book, write it down here.
 
Engineering news on Phys.org
I can't say I know of any good on-line and free tutorials. Next to simply using it, I would recommend you pick up a Pro-e book by Roger Toogood. He writes pretty well in step-by-step fashion. I have seen a couple of his books for 2000 and was helpful.
 
great, thank you a lot. i'll probably buy it from amazon.
 
i want pro e tutorials tutorials
 

Similar threads

What Are the Key Differences Between Pro Engineer Wildfire 3.0 and 4.0?
  • · Replies 1 ·
Replies
1
Views
4K
Python Understanding Graph Neural Networks (GNNs) Tutorials & Examples
  • · Replies 2 ·
Replies
2
Views
3K
What are some pieces of advice for a struggling programming learner?
  • · Replies 40 ·
2
Replies
40
Views
4K
Help with math terminology in tutorial
  • · Replies 4 ·
Replies
4
Views
2K
Is mechanical engineering the right thing to learn?
  • · Replies 4 ·
Replies
4
Views
2K
How are/were computers used in jet engine design?
  • · Replies 20 ·
Replies
20
Views
3K
Find a Book for ProE Woldfire 2.0
  • · Replies 1 ·
Replies
1
Views
3K
Automotive Steering Force, Determining the Lever Arm
  • · Replies 9 ·
Replies
9
Views
2K
Proposed new Sticky: ANSYS Tutorials for Beginners
  • · Replies 24 ·
Replies
24
Views
9K
How to become a Design Engineer?
  • · Replies 13 ·
Replies
13
Views
5K