Why Do Train Wheels Screech on Curves?

AI Thread Summary
The screeching noise of train wheels when navigating curves is primarily due to the conical shape of the wheels, which allows for differential movement between the inner and outer wheels. As the train turns, the outer wheel travels along a larger diameter, while the inner wheel operates on a smaller diameter, leading to potential slipping. The flanges, which are often thought to keep the wheels on the rails, serve mainly as a backup mechanism. The screeching can also result from improper track geometry, maintenance issues, or excessive speed. Overall, the combination of wheel design and track conditions contributes to the characteristic noise heard during turns.
Philip Chen
Messages
1
Reaction score
0
Does anybody know why you hear the train wheel SCREECH when the train makes a curve?
 
Physics news on Phys.org
My guess would be that the axle is solid so at least one of the wheels has to be slipping since the outer and inner tracks are different lengths.
 
russ_watters said:
My guess would be that the axle is solid so at least one of the wheels has to be slipping since the outer and inner tracks are different lengths.

This is actually taken into account. The wheels of a train are conical. When the truck (set of wheels) goes around a curved section of track, it moves outwards. This shifts the contact on the outer wheel to a larger diameter part of the wheel, while the contact on the inner wheel is moved to a smaller diameter.

http://www.railway-technical.com/whlbog.shtml" .

The fact that the wheels are conical is also what keeps the wheels on the rails, not, as seems intuitive, the flanges. The flanges are only a last resort.

And to answer the OP's question: It is the occasional contact of these flanges - due to incorrect geometry, poor maintenance or wrong speed - that causes the scraping noise.
 
Last edited by a moderator:
Thread 'Gauss' law seems to imply instantaneous electric field'

Thread 'Gauss' law seems to imply instantaneous electric field'

Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
View full post »

Thread 'Highway: Deriving speed from Doppler shift'

I passed a motorcycle on the highway going the opposite direction. I know I was doing 125/km/h. I estimated that the frequency of his motor dropped by an entire octave, so that's a doubling of the wavelength. My intuition is telling me that's extremely unlikely. I can't actually calculate how fast he was going with just that information, can I? It seems to me, I have to know the absolute frequency of one of those tones, either shifted up or down or unshifted, yes? I tried to mimic the...
View full post »

Similar threads

B Jaan Kalda kinematics -- Radius of Curvature of a Cycloid
Replies
6
Views
1K
I Apparent Initial Acceleration due to Precession of Wheel Gyroscope?
Replies
6
Views
2K
I How does the mass of the wheels affect the car's acceleration?
Replies
15
Views
4K
I Angular momentum and turning a bicycle
Replies
17
Views
4K
I How Does Changing Mass and Spring Force Affect Watch Oscillators?
Replies
11
Views
2K
A wheel of radius r rolls along a curve
Replies
13
Views
1K
B How does running in a moving train affect race times?
Replies
27
Views
2K
B Why use this premise behind the Maxwell-Boltzmann curve?
Replies
8
Views
1K
B Roulette wheel physics and probability
Replies
9
Views
5K
Help with wheels, stopping forces and possibly Simpack
Replies
24
Views
4K

Hot Threads

Recent Insights

Back
Top