- #1
Tripp
- 1
- 0
I am using water electrolysis, and I need some bolts to be the anode/cathodes and I don't want them to corrode. Before anyone asks I will not be adding salt so there will be no chlorine. Thanks!
Electrolysis is a process in which an electric current is used to break down a chemical compound into its component elements. This is achieved by passing the current through an electrolyte, which is a liquid or solution that conducts electricity.
During electrolysis, the electric current causes the metal to react with the electrolyte, which can lead to the formation of corrosion or rust on the metal surface. This can weaken the metal and affect the efficiency of the process.
Some readily-available metals that are resistant to corrosion in electrolysis include platinum, gold, and stainless steel. These metals have a high resistance to oxidation and are often used in the construction of electrolytic cells.
A metal's resistance to corrosion in electrolysis depends on its ability to resist oxidation and maintain its structure in the presence of an electric current. This is often determined by the metal's chemical composition, surface finish, and environmental factors.
In addition to corrosion resistance, other factors to consider when choosing a metal for electrolysis include conductivity, cost, and availability. Some metals may have good resistance to corrosion but may not be as conductive, making them less efficient in the electrolysis process.