Recent content by Rajashekar

  1. R

    Calculating Gearbox Torque for Rotating a 500kg Load with a Handwheel Setup

    Hi Benny Thanks for your reply I have attached the image for your understanding The gearbox is mounted to a block The block has a guide rod and that swivels when gearbox is operated The gearbox is a double reduction gearbox
  2. R

    Calculating Gearbox Torque for Rotating a 500kg Load with a Handwheel Setup

    Hi team In my one of the application I have to use the gear box to rotate 500 kg load I have to use handwheel to rotate I am using the formula Torque= force x per. Distance x coefficient of friction = 500x.7x.8 : 2800 Nm Is it correct to calculate the torque I have attached the image for...
  3. R

    Lead Screw diameter for lifting 200Kgs

    Thanx, I will look into that and get the specifications and will get back if I need some more details
  4. R

    Lead Screw diameter for lifting 200Kgs

    Hi I one of my application i am using the lead screw arrangement to lift 200kg weight using handle I used trapezoidal thread and nut. Could anybody suggest the diameter required for lifting the weight of 200kg
  5. R

    Deflection of circular plate

    The lid weight is 30kg, the actuator load carrying capacity 1500N.
  6. R

    Deflection of circular plate

    Hello Berkeman, Thanks for your reply. Here is the image I have attached, the plate is mounted to lid using 4- M10 screws and the lid is lifted to 100mm length Thanks in advance:smile:
  7. R

    Deflection of circular plate

    Hi In one of my application I am using a linear actuator to lift a 30kg lid which has a diameter of 380mm. I can only use 1/3rd portion on the lid to take support, for actuator which I used a 60*20*180 long plate mounted to the lid and lift. How to calculate the deflection of lid when lifted to...
Back
Top