Any recommendation about Microelectronic Fabrication?

  • Thread starter Thread starter walkinginwater
  • Start date Start date
  • Tags Tags
    Recommendation
AI Thread Summary
Microelectronic fabrication resources are available for beginners in electrical engineering, particularly through online tutorials and forums. The book "The Science and Engineering of Microelectronic Fabrication" by Stephen A. Campbell is a recommended starting point. Users suggest utilizing MIT's OpenCourseWare for comprehensive information on fabrication and microelectronic devices. Additionally, searching specific keywords related to integrated circuits and fabrication can yield useful online materials. Engaging with these resources can significantly enhance understanding of IC fabrication and MEMS.
walkinginwater
Messages
21
Reaction score
0
Hi, dear all:
I am a newbie in EE, now I am studying some courses related to IC fabrication and MEMS. I have the book : "The Science and Engineering of Microelectronic Fabrication" by Stephen A. Campbell. I am really wanted to know are there any online tutorial materials and discussion forums for me?
Thanks in advance!
 
Engineering news on Phys.org
For online tutorials, just use your favorite http://www.interq.or.jp/japan/se-inoue/e_search.htm and plug in key words like: "Integrated circuit", fabrication, & tutorial. I tried it and saw some really useful URLs.
 
Last edited by a moderator:
Have you looked to see what MIT's OpenCourseWare ( http://ocw.mit.edu ) has?
 
there is nothing about that!
 
@ walkingwater

Hi! Go through the MIT OCW site there is lots of information there.

Fabrication and Microelectronic devices are dwelt upon quite nicely.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top