Which Compressor Is Best for Achieving 4 Atmospheres: Centrifugal or Axial?

  • Thread starter Thread starter student_
  • Start date Start date
  • Tags Tags
    Compressor
AI Thread Summary
Centrifugal compressors are known for their high efficiency and ability to handle large flow rates, making them suitable for achieving 4 atmospheres with the specified mass flow rate. However, they may have limitations in pressure ratio and are less effective at lower flow rates. Axial compressors, on the other hand, excel in high-pressure applications and can achieve higher pressure ratios, but they tend to be more complex and less efficient at lower mass flow rates. The choice between the two depends on specific design requirements, including efficiency, complexity, and operating conditions. Ultimately, understanding the application and performance characteristics of each type is crucial for making an informed decision.
student_
Messages
9
Reaction score
0
I have to design a compressor that can compress air from atmosheric pressure to 4 atmosphere, with a mass flow rate of 50898.62 kg/h of compressed air.

I am stuck between the choice of two types of compressors. They are:

  • Centrifugal Compressor
  • Axial Compressor

I have looked at their descriptions but cannot decide which one is the better one to design.

Would someone please guide me through this.

regards
 
Engineering news on Phys.org
First things first: Can you name some pros and cons of each design?
 
Thread 'I need a concave mirror with a focal length length of 150 feet'

Thread 'I need a concave mirror with a focal length length of 150 feet'

I need to cut down a 3 year old dead tree from top down so tree causes no damage with small pieces falling. I need a mirror with a focal length of 150 ft. 12" diameter to 36" diameter will work good but I can't think of any easy way to build it. Nothing like this for sale on Ebay. I have a 30" Fresnel lens that I use to burn stumps it works great. Tree service wants $2000.
View full post »

Thread 'Questions about the Tesla turbine'

Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
View full post »

Similar threads

How important is it to keep an air motor warm?
Replies
11
Views
2K
Understanding Centrifugal Compressor Flow Rates
Replies
2
Views
7K
Calculating parameters of centrifugal compressor
Replies
20
Views
4K
Dyson bladeless fan/turbine compressor building air cooling?
Replies
6
Views
9K
Centrifugal compressor with relief valve formulas
Replies
1
Views
2K
Choosing an efficient compressor
Replies
8
Views
2K
How does air behave in the daisy chaining of compressors?
Replies
10
Views
4K
Designing an Actual Vapor-Compression Refrigeration Cycle
Replies
8
Views
5K
Comparetto type Air Cleaner/Filter: What causes its increased airflow?
Replies
5
Views
3K
How to determine the pressure drop in pipe diameter sizing
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top