Designing Sun Tracker w/ GPS | Get Ideas & Suggestions

  • Thread starter Thread starter Essadaoui_Red
  • Start date Start date
  • Tags Tags
    Gps Sun
AI Thread Summary
The discussion focuses on designing a GPS-based sun tracker for photovoltaic panels, aiming to orient them towards the sun throughout the day. Participants express confusion about the necessity of GPS for tracking solar position, suggesting that a real-time clock and initial location settings might suffice. The main challenge highlighted is developing a program that calculates the sun's position in real-time and translates that information into control signals for the tracker. Suggestions and ideas are sought to overcome these programming hurdles. The goal is to create a universal system that functions effectively in various geographical locations.
Essadaoui_Red
Messages
8
Reaction score
0
Hello,
we try to design and build a sun tracker carrying a plate photvoltaîque, piloted by GPS,

GPS must locate the position of the sun and gives an order to move towards this position throughout the day,
but we really do not know where to start

all your suggestions and ideas will be welcome,

thank you in advance for your helps,
cordially
 
Engineering news on Phys.org
Essadaoui_Red said:
Hello,
we try to design and build a sun tracker carrying a plate photvoltaîque, piloted by GPS,

GPS must locate the position of the sun and gives an order to move towards this position throughout the day,
but we really do not know where to start

all your suggestions and ideas will be welcome,

thank you in advance for your helps,
cordially

Sounds like a school project, so we need to hear your thoughts before we can offer any tutorial hints.

And if your PV panels are not mobile, you don't need an active GPS attached, right? Just a real-time clock, and an initial Lat/Long setting...
 
I don't understand what you are trying to achieve.

A GPS unit will tell you where it is on the surface of the Earth.

What does that have to do with the position of the sun in the sky? And how would a device" move towards this position"?
 
Hello,
we try to build an universal sun tracker, means that it work in any where (africa,USA, UE...), the system should localise it's position via GPS, and calculate the position of the sun...and orients th PV to the sun...
the problem is in the program that calculate the position in real time ? and how can we transform these informations to control signal ?

thank you
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top