Magnet in a AC current solenoid

AI Thread Summary
Placing a magnet in an AC current solenoid leads to its demagnetization due to the rapidly alternating magnetic field. This field interacts with the magnet's atomic structure, causing precession of electron magnetic dipoles before ultimately aligning parallel to the applied field. The magnetic field effectively enters the magnet, similar to how it would with a piece of iron. The process is akin to the demagnetization observed in transformer cores, although the B-H curves differ between permanent magnets and transformer materials. Understanding this interaction is crucial for applications involving magnetic materials in AC fields.
sgstudent
Messages
726
Reaction score
3
when you place a magnet into a solenoid with a ac current it will get demagnetised. So does this mean that the magnetic field will go into the magnet in the opposite direction of the magnet's own magnetic field? and disalign it. meaning will the magnetic field enter the magnet as though it is like another piece of iron?

thanks for the help!
 
Physics news on Phys.org
A rapidly alternating mag field will dis-arrage the mag-wessels. hence deenergising the same.
 
Perhaps it's easier to consider the magnet as a large number of atoms. Since electron and protons have very small dimensions, most of the atom is empty space ( vacuum). So, the magnetic field "enters" the magnet. The filed there applies toque on electron magnetic dipoles.The torque doesn't simply rotate the dipole to get parallel with the field but it initially cause precession. the precession damps usually after a short time ( in order of nano-seconds) and the new alignment would be parallel with the applied field ( assumed strong enough to case the reversal)
 
This link,
http://www.google.com/url?sa=t&rct=...rey3Dw&usg=AFQjCNGKy8swuzdp-t8dpWyhgMX3vsrpTg

on page 27 & 28 (PDF pages 29 & 30) speaks to demagnetizing of transformer cores that have retained magnetism.

They have a different shaped B-H curve than your permanent magnet but principle is same.

If thet link doesn't work, search on : ittechinfoappguide.pdf

and pick this one: www05.abb.com/global/scot/scot235.nsf/.../ittechinfoappguide.pdf
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top