Build Coil-Gun w/ Lithium Car Batteries: Rapid Fire & High Velocity?

  • Thread starter Thread starter supak111
  • Start date Start date
AI Thread Summary
The discussion revolves around building a coil-gun powered by three 12v lithium car batteries in series, focusing on rapid-fire capability without the use of capacitors. The original poster questions whether using only batteries could achieve high projectile speeds with multiple stages. However, the forum moderators emphasize that discussions on constructing such devices are prohibited due to safety concerns and the potential dangers associated with high current applications. They clarify that while coilguns are legal, the risks involved in building them warrant caution and discourage any detailed guidance on the project. Ultimately, the thread was closed due to the nature of the topic being deemed unsafe.
supak111
Messages
47
Reaction score
1
I'm building a coil-gun. I want to use 3 12v lithium car batteries in series to power the gun. Lithium car batteries have enough energy, are light so gun would be smaller & lighter without capacitors, but most importantly I need the gun to be able to rapid fire so I don't have much time for cap charging.

Lets say that I could build an super long barrel with say a 1000 coils/stages on the gun. And each coil is fired by opti switch at the right time, in this hypothetical gun would it be better to power the gun with just batteries mentioned above or still use caps on each stage of the gun?
(again the gun needs to rapid fire so not much time for charging and don't have much room for huge power supply to do so)

If I just use the batteries to power the coilgun, and I have many stages in the gun can I still theoretically get the projectile to any speed by adding more and more stages?

Thanks everyone
 
Engineering news on Phys.org
supak111, Welcome to Physics Forums! You have come to the wrong place to get help in building a coilgun. If you click on "rules" at the top of the page, then scroll down that page you will find this:

"PROHIBITED: Illegal & Dangerous Activities: Explicit "how to" discussions of illegal and/or dangerous activities, or posts advocating such activities, are prohibited; such as: how to make explosives, manufacture crack, steal software, hack into the CIA,..."

Sorry, but you cannot expect any member here to help. Now, if you ever have a doubt or question about anything non-lethal/not a weapon, then do post it here. Members here are always ready to assist everyone who wants to learn and shows herself to be a true searcher.

Cheers,
Bobbywhy
 
But coilguns and railguns are 100% LEGAL in all 50 US states. Actually by federal definition of a "firearm" coilguns and railguns are not even considered guns which is what makes them so appealing to build and use.

I'm def not trying to break any forum rules
 
For coil guns to be able to 'shoot' or 'launch' anything, you need a HIGH HIGH current, and that's dangerous. We don't want anyone to die because someone gave you not safety first advice from this forum.
Car batteries: dangerous

If you don't understand why your project is incredibly impractical and not implementable, then you probably shouldn't be able allowed to operate a toaster oven.
 
Dangerous discussions are not allowed at the PF. Thread is closed.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top