Where to find sample fluid stirring data?

  • Thread starter Thread starter muffinman123
  • Start date Start date
  • Tags Tags
    Data Fluid
AI Thread Summary
Force data for fluid stirring is challenging to obtain with a low-resolution sensor, especially for Newtonian fluids that produce minimal reaction forces. To improve readings, using more viscous fluids like ketchup or honey may help achieve a force greater than 0.5N. Alternatively, increasing the size of the stirring implement can enhance the force registered by the sensor. Exploring different stirring tools, such as mixers, could also yield better results. Accessing sample graphs for fluid stirring forces might provide additional insights for experimentation.
muffinman123
Messages
17
Reaction score
0
I want to find some force data for fluid stirring. originally I intended to record the data using my force sensor, but it doesn't have the resolution to read stirring force for Newtonian fluid.

unless there's a Newtonian fluid with high enough viscosity to produce a reaction force greater than 0.5N, my sensor can't read it.

is there a place to download some sample graphs for the force of fluid stirring motion? thx
 
Physics news on Phys.org
I have a couple of ideas:

1. Try some viscous fluids, such as ketchup, honey, or perhaps mix some sugar water to a consistency that's thick enough to register, but still approximately Newtonian over a small range.

2. If those won't increase the force that registers on your instrument, perhaps you need a larger stirring implement (larger surface area). Is it just a cylinder, or is it something else like a mixer (like an egg beater tool)? As you scale up the size of the stirring tool, you'll scale up your force as well.
 
Thread 'Gauss' law seems to imply instantaneous electric field'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...
Back
Top