RF radiation living near TV/radio tower

AI Thread Summary
Living near a TV tower, such as the 230-meter one mentioned, is generally considered safe, with no substantial evidence indicating health risks from RF radiation. Discussions highlight that the power levels emitted are low compared to other sources, like cell phone towers. Many individuals living close to TV masts report no adverse health effects, often enjoying improved television reception. Regulatory bodies enforce strict guidelines on residential proximity to such towers, ensuring safety standards are met. Overall, the consensus is that concerns about RF radiation from TV towers are largely unfounded.
nighthawky2
Messages
1
Reaction score
0
Hi there,

I noticed another thread about a guy who was considering living near a cell phone tower. People pointed out that he shouldn't worry because the amount of watts was low compared to tv towers etc. This makes me worry because I'm going to be moving into a property about 200 metres away from a 230 metre tv tower that transmits multiple tv channels and also transmits fm radio...

There's so much conflicting and emotive information from vested interests out there I don't know what to think. I would be very grateful to have an opinion from you guys about the science of possible risks at this higher level of RF.

Cheers
 
Science news on Phys.org
I don't think we need to go through this again. The thread explains quite clearly how little danger is posed and points quite clearly to the fact there is no evidence they present a danger.

I know people who live almost right under a TV mast and suffer no ill effects - unless you count a fantastic TV picture as one.

Any further discussion is pointless.

If you are looking for sources: http://madsci.org/posts/archives/2003-11/1069211502.Ph.r.html

Although not a brilliant source in itself it links to the FCC and an Australian regulatory authority on the subject.

There are strict controls relating to how close you can live to them, despite there being no inherent risk. So if you have a place near one it cannot be within the specified range.
 
Last edited:
Agreed. This thread is closed.
 
I was watching a Khan Academy video on entropy called: Reconciling thermodynamic and state definitions of entropy. So in the video it says: Let's say I have a container. And in that container, I have gas particles and they're bouncing around like gas particles tend to do, creating some pressure on the container of a certain volume. And let's say I have n particles. Now, each of these particles could be in x different states. Now, if each of them can be in x different states, how many total...
Thread 'Why work is PdV and not (P+dP)dV in an isothermal process?'
Let's say we have a cylinder of volume V1 with a frictionless movable piston and some gas trapped inside with pressure P1 and temperature T1. On top of the piston lay some small pebbles that add weight and essentially create the pressure P1. Also the system is inside a reservoir of water that keeps its temperature constant at T1. The system is in equilibrium at V1, P1, T1. Now let's say i put another very small pebble on top of the piston (0,00001kg) and after some seconds the system...
I need to calculate the amount of water condensed from a DX cooling coil per hour given the size of the expansion coil (the total condensing surface area), the incoming air temperature, the amount of air flow from the fan, the BTU capacity of the compressor and the incoming air humidity. There are lots of condenser calculators around but they all need the air flow and incoming and outgoing humidity and then give a total volume of condensed water but I need more than that. The size of the...

Similar threads

Back
Top