A comprehensive book for finite element methods ?

AI Thread Summary
A comprehensive book recommended for finite element methods is "The Finite Element Method in Engineering" by S. S. Rao. It covers fundamental concepts and includes numerous solved numerical examples, making it suitable for mechanical engineering students. The book also provides sufficient detail for programming applications. Portions of the text are available on Google Books for preview. This resource is highly regarded for its thorough approach to the subject.
whoyameye
Messages
4
Reaction score
0
I am doing BE in mechanical engineering. I'm looking for a comprehensive book on finite element methods preferably with a lot of solved numericals . Suggestions, please?
 
Engineering news on Phys.org
:| :|
 
"The Finite Element Method in Engineeering" by S. S. Rao

Covers the basics and has lots of numerical results and enough detail to program things.

You can see big chunks of it on Google Books.
 
Ahhh... finally.. Thanks for the reply!
 
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Thread No-Go plug gage allows 3 turns to enter. That's too many!'

After over 25 years of engineering, designing and analyzing bolted joints, I just learned this little fact. According to ASME B1.2, Gages and Gaging for Unified Inch Screw Threads: "The no-go gage should not pass over more than three complete turns when inserted into the internal thread of the product. " 3 turns seems like way to much. I have some really critical nuts that are of standard geometry (5/8"-11 UNC 3B) and have about 4.5 threads when you account for the chamfers on either...
View full post »

Similar threads

Finite element method approximation
Replies
0
Views
995
The 8 Mode Shapes of a plane finite element
Replies
2
Views
1K
[ANSYS] Meshing based on Keypoints
Replies
0
Views
1K
Abuse of the Finite Element Method
Replies
9
Views
3K
Structural FEA - understanding the fundamentals
Replies
7
Views
2K
Math vs. FE Method: Comparing Mechanical Engineering Focus
Replies
2
Views
2K
Finite Element Model of Euler-Bernoulli Beam Theory
Replies
1
Views
2K
Finite Element Method: Find Total Mass Matrix of Coupled Element
Replies
4
Views
2K
Nonlinear Structural Analysis with Finite Element Method
Replies
2
Views
1K
Thermoelasticity problem with FEM in MATLAB
Replies
2
Views
1K

Hot Threads

Recent Insights

Back
Top