Black Oil - Why Does It Appear All Colors?

  • Thread starter Thread starter Marilena1983
  • Start date Start date
  • Tags Tags
    Oil
AI Thread Summary
Black oil on a windscreen can appear to show multiple colors due to the phenomenon of light interference. While black absorbs all frequencies of light, the oil acts as a thin film, causing light of different wavelengths to refract and reflect at varying angles. This results in certain wavelengths reinforcing or canceling each other out, creating a spectrum of colors. The discussion suggests that understanding this effect is similar to observing rainbows in soap bubbles. The interplay of light and oil is key to explaining the visual effects seen.
Marilena1983
Messages
7
Reaction score
0
Black oil - colours?

1. How does black oil on a windscreen appear to be all colours?



2. Is it because black absorbs all frequencies of light?



3. I'm not sure how to answer this question can anyone help?
 
Physics news on Phys.org


It's nothing to do with the color of the oil
hint - look up interference
 


does this make sense?

the oil it acts like a thin film. The light of different wavelengths (colors) refract and reflect at different angles, and the reflections add up or cancel each other out by superposition depending on the wavelength and angle.
 


Yes - but do you understand that or did you just cat&paste it from wiki?
 


its an explanation someone gave me today but I am still not sure i understand it completely.
 


You may have better luck (because it is a more common) looking into rainbows in soap bubbles. Same principle, but much better hits when searching.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top