Build a Home-Made Generator: Get Answers Here

  • Thread starter Thread starter shubhranshu_s
  • Start date Start date
  • Tags Tags
    Generator
AI Thread Summary
To build a homemade generator for operating a small fan and bulb, one should consider using either AC or DC power, with AC being easier to produce. The discussion emphasizes the importance of researching basic generator designs and understanding the energy source, such as hand crank, wind, or water. Participants suggest starting with a small DC motor as a generator and studying automotive alternators, which typically produce multi-phase AC. The size and power of the magnets needed depend on the generator's design, and achieving a strong magnetic field is crucial. Overall, thorough preparation and research are essential before diving into the project.
shubhranshu_s
Messages
2
Reaction score
0
hey i want to create a simple working generator that can be used to produce electricity so that i can operate a small fan and a bulb. power produced should preferably be ac in nature but dc can also be made to work.

i just wanted to know how much powerful and what size of a magnet is required to fulfill the criteria ? and also the rpm of the generator needed be produced .
can anybody help..?
 
Physics news on Phys.org
shubhranshu_s said:
hey i want to create a simple working generator that can be used to produce electricity so that i can operate a small fan and a bulb. power produced should preferably be ac in nature but dc can also be made to work.

i just wanted to know how much powerful and what size of a magnet is required to fulfill the criteria ? and also the rpm of the generator needed be produced .
can anybody help..?

Welcome to the PF.

What research and reading have you done on your own so far?
 
What source of energy were you planning to use to operate it? Hand crank? Wind? Water? Hamster wheel (my favourite)?
 
i just wanted to know these facts so that i can get my head straight and i have ample data before i really dive into this project...
 
Nowadays, the magnets you can buy cheaply are really impressive. It will be easy to produce a strong enough field if you can make yourself a reasonable 'yoke' to rotate your coil in. Have you found information about the basic design of a generator? If you do not specifically need DC (and your applications don't) then and alternator (AC) is the easiest to make.
We like to help but I don't think anyone here will provide you with an actual design so, as berkeman has asked, what do you know so far? Which sources have you used? Spoon feeding is not in our nature - it's not good for you. :smile:
 
Perhaps just try using a small DC motor as a generator first.
 
You could study the design of automotive alternators. A typical alternator produces 3 or 4 phase AC which is converted to DC internal to the unit. Typical DC outputs are 100 - 150 amperes at 13 - 15 volts
 

Similar threads

Self excited induction generators and grid connected solar inverters?
Replies
9
Views
2K
Self Excited AC Single Phase Generator
Replies
12
Views
5K
Submarine noise level reduction, stealth question
Replies
9
Views
2K
Optimizing Electricity Generation with a Stationary Bicycle Generator
Replies
9
Views
2K
Problems Building a Van De Graaff Generator
Replies
3
Views
2K
Electronics My home solar energy generation and control system
Replies
9
Views
2K
I Mechanical power generated by a force F
Replies
41
Views
4K
Generator size vs frequency question
Replies
8
Views
4K
Is a Larger DC Motor Needed for Low Wind Speed Power Generation?
Replies
34
Views
4K
Why is the negative sign in the equation for motional EMF often discarded?
Replies
7
Views
4K

Hot Threads

Recent Insights

Back
Top