Building a Solar/Electric Car: Pros, Cons, and Costs

  • Thread starter Thread starter UESolarElect
  • Start date Start date
  • Tags Tags
    Building Car
AI Thread Summary
The discussion focuses on a school team's project to build a solar/electric car, exploring three options: building from scratch, using an existing frame, or converting a car. The team seeks detailed information on costs and time investments for these approaches to support their proposal, particularly favoring the conversion option. One participant shares their experience of converting existing frames by removing engines and building new systems. Clarification is provided on the differences between using an existing frame and converting a car, emphasizing the level of modification involved. The conversation highlights the need for resources and insights on project execution.
UESolarElect
Messages
3
Reaction score
0
My schools Solar/Elect car team is currently in the process of building a new car. www.solartiger.org[/URL] .we are faced with 3 choices, 1st is to build a car from ground up, 2nd is to build a car from an existing frame, and the 3rd is to convert a car.
I'm supposed to write a propsal, outling each of these ideas, pros cons etc. One thing i haven't found was detailed sites, where people have noted time/money put into projects. I want to have a tables showing these aspects, to help lean towards converting a car.
Any help will be greatly appreciated
Pat
 
Last edited by a moderator:
Engineering news on Phys.org
Can't help you with websites, but I can tell you what my school's (University of Maryland) teams do:

They convert existing frames, pulling out all of the engines and build the "guts" up from there.

What is the difference between the second and third option?

Hopefully someone can weigh in with a little more information for you.
 
The Difference, is that the second, is starting from a bare frame, custom body, and such. Where the 3rd is leave most systems intact, and then the neccacry components.
 
Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
Thread 'How can I find the cleanout for my building drain?'
I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...

Similar threads

Replies
19
Views
11K
Replies
16
Views
7K
Replies
2
Views
1K
2
Replies
96
Views
9K
Replies
2
Views
9K
Replies
9
Views
2K
Replies
22
Views
4K
Replies
4
Views
3K
Back
Top