Calculate Minimum Wing Area for Plane in Air | Bernoulli's Equation

  • Thread starter Thread starter PetetheGreek
  • Start date Start date
  • Tags Tags
    Airplane
AI Thread Summary
To calculate the minimum wing area needed for a small plane to stay airborne, Bernoulli's equation is applied to determine the pressure difference created by varying air velocities over the wings. The upward force generated by this pressure must equal the downward force due to gravity, which is calculated using the plane's mass. The pressure difference was found to be 4350 N/m², leading to the conclusion that the total wing area required is 6.75 m², or 3.37 m² per wing. Understanding the balance of forces is crucial for solving this problem. The discussion highlights the importance of applying fundamental physics principles to practical scenarios in aviation.
PetetheGreek
Messages
7
Reaction score
0
Hi guys, new here just wanted to say hello and I stumbled across this site while studying for my final, great site, now onto my question...

Homework Statement


A small plane of mass 3000 kg is flying in air of density 1.0 kg/m3. Air moves over the top and
bottom of the surface of the wings at velocities of 160 m/s and 130 m/s, respectively. What is
the minimum wing area needed, to keep the plane in air?


Homework Equations


Bernoullis equation and Area = Force/Pressure


The Attempt at a Solution


Ive found change in pressure to be 4350N/m2 but I can't find the force, nor am I sure how much pressure is needed to keep the plane in the air, any help would be appreciated, thanks in advance =/
 
Physics news on Phys.org
Well you have half the problem solved then. This pressure will cause an upward force on the wings. If you remember your pressure equation P=F/A then you can get the upward force knowing the surface area of the wings.

Then you ask yourself why does it need an upward force. Well what could be causing the plane to go down? And you remember that gravity has a downward force. So look up the force of gravity equation.

Then equate the two forces and solve for the surface area needed.

P.S.: A plane has 2 wings, so be sure to divide this surface area in half for the area needed on one wing.
 
The first thing that a lot of people forget to think about is to equilibrate the forces.

To just keep the plane in the air Force up = Force down.

Force down is mg...

Think about where you might get force up from...
 
awesome guys, thanks a bunch! i figured it out, 6.75m2, or 3.37 per wing
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top