Calculate Power Used to Climb Small Airplane - 2 Sig Fig %

  • Thread starter Thread starter Superfluous
  • Start date Start date
  • Tags Tags
    Engine Power
AI Thread Summary
The discussion revolves around calculating the fraction of engine power used by a small airplane to climb. With an engine power of 80 kW and a mass of 680 kg, the airplane ascends at 2.1 m/s. The lifting force is calculated using Newton's second law, resulting in a force of approximately 6664 N. The power used for climbing is then determined to be about 13994.4 W, which is 17% of the total engine power. This indicates that a significant portion of the engine's output is utilized for overcoming gravitational forces during ascent.
Superfluous
Messages
11
Reaction score
1
When its engine of power 80 kW is generating full power, a small single-engine airplane with mass 680 kg gains altitude at a rate of 2.1 m/s.

What fraction of the engine power is being used to make the airplane climb? (The remainder is used to overcome the effects of air resistance and of inefficiencies in the propeller and engine.)

Express your answer as a percentage using two significant figures.


So I'm stumped here. I need some hints on how to get started. Any help at all would be greatly appreciated. Thanks.
 
Physics news on Phys.org
Power is the rate of doing work. What is the work the engine is doing to gain height compared to the work of overcoming resistance and other effects? That is what do you know about the work done to move a mass from one height to another?
 
I couldn't quite follow your post, but I believe I have a solution now. Thanks.

P=\vec{F}\cdot\vec{v}

I'm given v=2.1\ m/s

I need to find F which I do by using Newton's 2nd law:

\Sigma F_{y}=-mg+L=0 where L is the lifting force.

So

L=mg

m=680\ kg
g=9.8\ m/s^{2}

Therefore,

F=L=6664\ N

P=\left(6664\ N\right)\left(2.1\ m/s\right)=13994.4\ W

Now I simply need to find what fraction of the full power this is:

\frac{13994.4\ W}{80000\ W}=0.17493

Hence, the percentage of engine power being used to make the airplane climb is 17\%.
 
Last edited:
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top