Calculating Acceleration in a Pulley System

AI Thread Summary
In a pulley system involving an 80 kg man and a 40 kg dumbwaiter, the acceleration was calculated to be 0.2 m/s² downward. The man exerts a force of 200 N, which affects the system's dynamics. Initial calculations by users varied, with one suggesting an acceleration of 8.1 m/s², but this was incorrect. The correct approach involves analyzing forces separately, leading to the conclusion that the net force results in a downward acceleration. The final answer aligns with the textbook solution, confirming the acceleration of the dumbwaiter.
eno
Messages
7
Reaction score
0
PLZ HELP! I am puzzled with this problem, and all i could find are that the forces equal, but the ans int eh back of the textbook clearly says the solution is 0.2 m/s2

Question: This situation occurs in a pulley system. A 80.0 kg man inside a 40.0 kg dumb waiter (like an elevator) pulls down on the rope. At the end of the rope, it is attached to the dumb-waiter. At the other end, the person exerts a force. At that moment, the scale on which he is standing reads 200N. Determine the elevator's acceleration.

THX for ur time!
 
Physics news on Phys.org
Hmm.. that's wierd. I didn't get 0.2m/s^2

Let me try to understand this better. The man is inside the dumbwaiter (which will pull up the elevator) has a mass of 80kg, the dumbwaiter is 40kg, so total mass of the dumbwaiter is 120kg. Correct?


http://img52.exs.cx/img52/1381/2035.gif


I got 8.1 m/s^2 as an answer. So I don't know if I'm wrong, or the book is.
 
Last edited:
MAYBE this is the correct answer:
80+40=120

(120)(9.8)=1176

F=MA

A=\frac{F}{M}

A=\frac{200}{1176}

A=0.17m/s^2
Probably the 0.17 is rounded off.
 
Last edited:
sorry, Raza, nice try. the 1176 is the force, and not the mass, so u cannot use the force of 200N to divide that force, which results in some unknown unit number. THe answer just conincidently matches with the ans int he book, but i am sure the way u got it is wrong...again, thanks for trying.

physik, here's the link to the actual question and diagram from the textbk:

http://www.enovon.com/public/physics.jpg

again, thanks for trying, maybe u can understand the problem better by this clear picture :)
 
Last edited by a moderator:
Let us consider the dumb-waiter separately.
The man standing on it has a mass 80 kg, but the force exerted by him on the elevator is 200N.
He is applying some force on the rope, say F.
80g-F=200
You can solve this to know F.
Now the weight of the elevator is 40 kg ang the force exerted by the man is 200N. Let the acc. of the elevator be a.
F-200-40g=40a.
Substituting F=80g-200
we get 80g-200-200-40g=40a
Therefore,40g-400=40a
Therefore,a=g-10,
Therefore,a=-0.2m/s^2
That is 0.2 m/s^2 downwards
 
thx alot, gauravkukreja!
 
Thread 'Minimum mass of a block'
Here we know that if block B is going to move up or just be at the verge of moving up ##Mg \sin \theta ## will act downwards and maximum static friction will act downwards ## \mu Mg \cos \theta ## Now what im confused by is how will we know " how quickly" block B reaches its maximum static friction value without any numbers, the suggested solution says that when block A is at its maximum extension, then block B will start to move up but with a certain set of values couldn't block A reach...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top