Calculating Distance and Velocity: Solving Kinematics Problems

  • Thread starter Thread starter bobby_burke
  • Start date Start date
  • Tags Tags
    Kinematics
AI Thread Summary
The discussion revolves around solving kinematics problems involving a tortoise chasing the Easter Bunny and an automobile overtaking a truck. The initial setup includes the bunny's constant speed of 25 m/s and the tortoise's acceleration of 3 x 10^-3 m/s^2, leading to the equation 25m/s t = (0 m/s) t + 0.5(3 x 10^-3 m/s^2) t^2 for time calculation. For the second scenario, the automobile accelerates at 1.8 m/s^2 while the truck moves at a constant speed of 8.5 m/s, requiring a similar setup to find the distance and speed at which the automobile overtakes the truck. The time calculated for the automobile to catch up was 9.4 seconds, prompting further inquiries about the corresponding distance and velocity. The discussion emphasizes the importance of correctly applying kinematic equations to solve for time, distance, and speed in various scenarios.
bobby_burke
Messages
7
Reaction score
0
The Easter Bunny runs along a straight and narrow path with a constant speed of 25 m/s. he passes a sleeping tortoise, which immediately starts to chase the bunny with a constant acceleration of 3 x 10^-3 m/s^2. How long does it take the tortoise to catch the bunny? (Answer in hours)

ok.. so far I've established the following:
Vbunny = 25m/s
a tortoise = 3 x 10^-3
Vi tortoise = 0 m/s

i've got hte formula Vbunny = d/t

i know that i have to use the formula d = Vi t + .5 a t^2

and i know that the distance for both will be the same. that's about as far as it goes.

*new breakthrough*

i have an equation set up:
25m/s t = (0 m/s) t + .5 (3 x 10^-3 m/s^2) t^2

and my next question is basically the same thing:

At the instant when the traffic light turns green, an automobile starts with a constant acceleration of 1.8 m/s^2. At the same time a truck traveling with a constant speed of 8.5 m/s overtakes and passes the automobile. (a) How far beyond the starting point will the automobile overtake the truck? (b) How fast will the car be traveling at that instant?

same question, different values and scenarios. any help would be greatly appreciated
 
Last edited:
Physics news on Phys.org
For the first one, just solve the equation you wrote for t and that is the answer.

For the second one, set it up the same way:
\frac{1.8}{2}t^2=8.5t

Once you've solved for t, you can use that to find the distance traveled (8.5*t from the constant speed of the truck) and for the car's speed (v = vo+at)

ETA: Thanks tony873004
 
Last edited:
Just fixing jamesrc's tex code :)
\frac{1.8}{2}t^2=8.5t
 
for time i broke the equation down into:
8.5 m/s = t
.5(1.8m/s^2)

and my time was 9.4 seconds... sound right?
 
thanks guys, you have been a big help tonight
 
That sounds right for t. But the question asks for distance and velocity. Did you get them yet?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top