Calculating Power Loss from Voltage Change at 3 Ohms Resistance

AI Thread Summary
To calculate power loss from voltage change at 3 ohms resistance, first determine the current at 12,000V using the formula P=IV, which results in a higher current and thus greater power loss. Next, calculate the current at 50,000V, which will be significantly lower, leading to reduced power loss. The power wasted can be calculated using the formula I^2R for both voltage scenarios. Finally, find the difference in power loss between the two voltage levels to assess the savings. This approach effectively demonstrates the impact of voltage on power loss in electrical systems.
urszula
Messages
5
Reaction score
0

Homework Statement


a power station delivers 520kW of power to a factory through wires of total resistance of 3 ohms ,how much less power is wasted if the electricity is deliverd at 50,000V rather than 12,000V


Homework Equations


P=IV=I^R =V^/R


The Attempt at a Solution



I tried to use voltage and resistance to calculate power and compare that with 520kW ,but it did not make any sense.Please help me.
 
Physics news on Phys.org
Determine the current flowing at 12000 V and 520 kW. Power wasted I^2R. Next determine the current at 50000 V and 520 kW (it will be much less than earlier). Determine power wasted. Find the difference.
 
Thanks a lot .
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Calculate the individual voltage, current and power in series and para
Replies
1
Views
1K
Power Line Losses: Trivial Problem, Confusing Answer
Replies
9
Views
2K
Voltage Drop in Parallel Receptacle Wiring
Replies
9
Views
2K
Long distance electrical transmission efficiency
Replies
2
Views
2K
Incandescent Bulb - suitable approximation for voltage-current curve
Replies
2
Views
896
Why is power loss = I^2R instead of P=VI or P=I^2R?
Replies
14
Views
3K
How Does Increasing Voltage Reduce Power Loss in Electrical Transmission?
Replies
6
Views
3K
Power Loss, Current, Resistors, and Voltage
Replies
4
Views
2K
Loss of energy in DC and loss reduction in AC circuits
Replies
2
Views
2K
Calculating Power Loss in Transmission Cables
Replies
7
Views
1K

Hot Threads

Recent Insights

Back
Top