Calculating Space Shuttle Velocity: Astronaut Melroy's Historic Flight

  • Thread starter Thread starter beachbabe0191
  • Start date Start date
AI Thread Summary
Astronaut Pam Melroy undocked the space shuttle Discovery from the International Space Station in October 2000, using four large springs to push away. The problem involves calculating the shuttle's velocity after separation, given the space station's mass of 73,000 kg moving at 0.50 m/s. The initial calculations showed the shuttle moving at approximately 0.54 m/s, but it was clarified that the relative speed of separation includes both the shuttle's and the space station's velocities. Thus, the total separation speed is 1.04 m/s, combining the shuttle's speed with the space station's. This highlights the importance of considering both spacecraft's movements in velocity calculations.
beachbabe0191
Messages
4
Reaction score
0

Homework Statement



Problem Statement: Astronaut Pam Melroy, history's 3rd woman space shuttle pilot, flew the space shuttle discovery to the International Space Station to complete construction in October of 2000. To undock from the space station, Pilot Melroy released goooks holding the 2 spacecraft together and the 68 000-kg shuttle pushed away from the space station with the aid of 4 large springs.
A) if the 73 000-kg space station moved back at a speed of 0.50 m/s, how fast and in what direction did the space shuttle move?
B) What was the relative speed of the 2 spacecraft as they separated?M_{1}= 68 000-kg
V_{1F}= ?
M_{2}= 73 000-kg
V_{2F}= -0.50 m/s
V_{o}= 0 m/s

Homework Equations



(M_{1} + M_{2}) V_{o} = M_{1}V_{1F} + M_{2}V_{2F}

The Attempt at a Solution



(68 000-kg + 73 000-kg)0 m/s = ((68 000-kg)( V_{1F} ) + (73 000-kg)(-0.50 m/s)

0 = (68 000-kg)V_{1F} - 36 500-kg \timesm/s
add -36 500-kg \timesm/s to 0

36 500-kg \timesm/s = (68 000-kg)V_{1F}

= 0.53676 m/s

BUT the back of the book for this odd says
1.04 m/s
 
Physics news on Phys.org
needs help very very very fast
 
It is asking you the speed they separate, remember that the ISS is also moving so it is the total speed between them.
You have worked out the speed of the shuttle from the starting point.
 
mgb_phys said:
It is asking you the speed they separate, remember that the ISS is also moving so it is the total speed between them.
You have worked out the speed of the shuttle from the starting point.

so my answer is the initial velocity??
 
No the answer is 0.5m/s for the iss plus 0.53676 m/s for the shuttle
So the velocity they are moving apart is 0.5 + 0.53676 = 1.04m/s
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top