Calculating the force during a collision.

  • Thread starter Thread starter mnaik3
  • Start date Start date
  • Tags Tags
    Collision Force
AI Thread Summary
To calculate the force during the collision between the car and the 4WD, the given accelerations of 114.9 m/s² for the car and 43.9 m/s² for the 4WD can be used with the formula F = ma, where the masses are 105 kg for the car driver and 60 kg for the 4WD driver. The distances that the vehicles crumpled, 54 cm for the car and 1.12 m for the 4WD, are relevant for understanding the impact dynamics and can help in estimating the forces over distance for a Force vs. distance graph. However, since the accelerations are already provided, the distances are not necessary for calculating the immediate forces on the drivers. The primary focus should remain on applying F = ma to determine the forces experienced during the collision. Understanding the crumple distances can enhance the analysis but is secondary to the force calculations.
mnaik3
Messages
1
Reaction score
0

Homework Statement



Okay, there was a side on collision between a car and a 4WD, the 4WD crashed into the side of the car. The accleration experienced by each driver has been given: Car:114.9 m/s2, 4WD : 43.9 m/s2. The masses have been give: Driver of Car: 105kg, Driver of 4WD: 60 kg.

The thing that confuses me is that the distances that the vehicles crumpled has also been given, it is stated that it is relevant, but i can't see how: Car side: 54cm. 4WD bonnet: 1.12m.

Do i just use the F = ma to find the force during collision, or do i need to use the distances.

By the way the reason i need this is to draw a Force vs. distace graph, so the distance might be relevant.


Homework Equations





The Attempt at a Solution

 
Physics news on Phys.org
If this were a real problem then how the vehicles crushed would be very important. You would use that to estimate the accelerations. But since the accelerations are given, then you can use the F=ma to find forces on the drivers.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top