Calculating the Hydrogen Spectrum: Understanding Energy Levels and Transitions"

  • Thread starter Thread starter Badrakhandama
  • Start date Start date
  • Tags Tags
    Hydrogen Spectrum
AI Thread Summary
The discussion focuses on calculating the hydrogen spectrum, specifically energy level transitions and their corresponding wavelengths. A user calculated the wavelength for a transition from -2.4 to -5.4 Joules, finding it to be 6.63 * 10^-7 meters, which corresponds to a red line in the emission spectrum. They seek clarification on identifying transitions that produce infrared and ultraviolet lines, noting that infrared transitions involve smaller energy changes while ultraviolet transitions require larger changes. It is clarified that transitions to -21.8 Joules produce ultraviolet lines (Lyman Series), while transitions to -2.4 Joules yield infrared lines (Paschen Series). Understanding these transitions is essential for accurately interpreting the hydrogen spectrum.
Badrakhandama
Messages
24
Reaction score
0
Hi,
I have a question concerning a hydrogen spectrum:

There are 4 energy levels drawn:
Starting from the top

-1.4 * 10^-19 Joules
-2.4 * 10^-19 Joules
-5.4 * 10^-19 Joules
-21.8 * 10^19 Joules

1st question:
Going from the second level to the third from the top (from -2.4 to -5.4) gives rise to a red line int he hydrgen emission spectrum. Calculate the wavelength. I have done this, and found it to be 6.63 * 10-7 metres

2nd Question: This is where I am confounded!

Draw two arrows on the diagram labelled IR and the ther UK, to show the transitions giving rise to lines in the infrared and ultraviolet regions. Explain how you made your choice for both...

I know that Infrared usually has a wavelength of 10^-5 metres, and UV has 10^-8 metres.
From this, I tried to find what transition is required:

E2-E1 = Planck's COnstant * Frequency (Velocity/Wavelength).


But I do not think this is correct. HELP ANYBODY!

Thank You.
 
Physics news on Phys.org
You're doing fine.
The UV transition will involve a larger energy change, and the IR transition a smaller one than the calculation you did originally. The options are limited with those 4 levels you have so it shouldn't be hard to chose one each that fits.
 
But if UV transition requires a greater energy change, then why is it nt frm -1.4 to -5.4 * 10^-19?

Thanks
 
All transitions to -5.4 (The Balmer Series) are in the visible.
The answer is that the transition you mention, although a larger one, is still not enough to give UV.
All transitions to -21.8 are UV (The Lyman Series), and all transitions to -2.4 are IR (Paschen Series).
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top