Calculating Work & Forces: A Toboggan Problem Solved in 2 Hours

  • Thread starter Thread starter tongtong
  • Start date Start date
  • Tags Tags
    Force Work
AI Thread Summary
A parent pulls a toboggan with three children at a constant velocity, exerting a force of 58 N at an angle of 18 degrees for 38 m. The normal force is calculated as Fn = mg = 66 kg * 9.8 m/s², and the coefficient of kinetic friction is determined using uk = Fk / Fn, resulting in uk = 0.0885. The work done by kinetic friction is found to be 2219.2 J, and three forces doing zero work include the normal force, gravitational force, and the applied force from the children. The work done by the parent over the first 25 m can be calculated using the same formula, confirming the application of Newton's first law in this scenario.
tongtong
Messages
2
Reaction score
0
I've been stuck on this problem for two hours and my teacher hasn't taught properly.

A parent pulls a toboggan with three children at a constant velocity for 38 m along a horizontal snow-covered trail. The total mass of the children and the toboggan is 66 kg. The force the parent exerts is 58 N [18 degrees above the horizontal].
a) Determine the magnitude of the normal force and the coefficient of the kinetic fiction.
b) Determine the work done on the toboggan by kniectic friction.
c) List three forces, or components of forces, that do zero work on the toboggan.
d) How much work does the parent do on the toboggan in pulling it the first 25m?

This is what I have gotten so far:
a) Fn = mg = 66*9.8 N
c) Fn, Fg, Fa of the children on the tobaggan
d) W = F*d*cos theta = 58*38*cos 18 = 2096.13 N
Is the above correct?

For part a, I don't understand how to solve for the coefficient. I only know of the formula, uk = Fk / Fn, but I don't think I have Fk?

Thanks for the help in advance, much appreciated.
 
Physics news on Phys.org
A constant velocity means that the forces on the sled are balanced. (Newton's first law) That thus means that the force the parents exert on the sled = frictional force pushing the sled back. Thus,

Fk(frictional force) = force the parents exert on sled (or 58 * cos18)
 


First of all, I understand your frustration with being stuck on a problem for such a long time. It can be frustrating when you feel like you haven't been taught the necessary concepts to solve a problem. However, it's important to remember that problem-solving and critical thinking are important skills to develop in any subject, and sometimes it takes time and effort to figure things out on your own. With that being said, let's take a look at the problem and see if we can help you out.

a) To solve for the coefficient of kinetic friction, we need to use the formula uk = Fk / Fn. In this case, we have been given the force the parent exerts (58 N) and the normal force (Fn = mg = 66*9.8 N). So we can plug those values into the formula and solve for uk. This gives us uk = 58 / (66*9.8) = 0.0885.

b) To determine the work done on the toboggan by kinetic friction, we can use the formula W = Fd = Fk *d. We have already calculated the coefficient of kinetic friction (uk = 0.0885) and we know the distance the toboggan was pulled (d = 38 m). So we can plug those values into the formula and solve for Fk. This gives us Fk = uk * Fn = 0.0885 * (66*9.8) = 58.4 N. Therefore, the work done on the toboggan by kinetic friction is W = Fk * d = 58.4 * 38 = 2219.2 J.

c) The three forces that do zero work on the toboggan are the normal force (Fn), the force of gravity (Fg), and the applied force (Fa) of the children on the toboggan. This is because these forces are perpendicular to the direction of motion of the toboggan and therefore do not contribute to the work being done.

d) To calculate the work done by the parent on the toboggan in pulling it the first 25 m, we can use the same formula as in part b. So W = Fd = F * d * cos theta. We already know the force exerted by the parent (F = 58 N) and the distance pulled (d = 25 m). We also know the angle between the
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top