Can a Compressed Spring Launch You Over a 15-ft Wall?

AI Thread Summary
The discussion centers on whether a compressed spring can launch a person over a 15-ft wall. A 3-ft diameter, 12-ft long cannon with a spring compressed to 1/10 its length is proposed for the launch. The key to solving the problem is calculating the potential energy stored in the spring and converting it to kinetic energy to determine the launch speed. The spring constant is critical, as it relates to the weight of the person using the spring and the amount it stretches when they hang on it. Ultimately, the calculations suggest that the spring's energy is sufficient to achieve the necessary height and horizontal velocity to clear the wall.
yellowstriker
Messages
1
Reaction score
0
There is a "cannon" that is a 3-ft diameter tube that is 12-ft. long with a stiff spring inside. The spring will be compressed to 1/10 its normal length and held. You will be on the spring. With perfect aim you will fly through the air over a 15-ft wall and land safely in a net. The spring is 10-ft. long. When you hang on the spring w/o touvhing the ground it stretches by 2-ft. Is it possible to make it over the wall?
 
Physics news on Phys.org
This smells like homework!

I don't understand the problem. YOu state "you will fly through the air over a 15-ft wall and land safely in a net", then ask "is it possible to make it over the wall". Didn't you just say it was??

I guess the problem is to find the potential energy stored in the spring when it is compressed, convert that to kinetic energy as you leave the cannon to find your initial speed and then use kinematics to determine if the maximum point of the trajectory really is more than 15 ft. To do that, you need to know the "spring constant" for the spring.

That's probably the point of "When you hang on the spring w/o touvhing the ground it stretches by 2-ft." but, while I know my weight and so could find the force on the spring when I hang on it I don't know yours so my solution wouldn't necessarily work for you! Does the problem give a weight for the person?
 
yellowstriker said:
There is a "cannon" that is a 3-ft diameter tube that is 12-ft. long with a stiff spring inside. The spring will be compressed to 1/10 its normal length and held. You will be on the spring. With perfect aim you will fly through the air over a 15-ft wall and land safely in a net. The spring is 10-ft. long. When you hang on the spring w/o touvhing the ground it stretches by 2-ft. Is it possible to make it over the wall?

The condition for success is:

Spring potential energy > mgh + KEtop where h is the height of the wall and KEtop is your kinetic energy at maximum height (vertical speed = 0). There has to be some extra energy in the spring to provide horizontal acceleration to give you a horizontal velocity to actually get over the wall but ignore that for the moment

So:
\frac{1}{2}kD^2 > mgh

To determine K, we know that it stretches 2 feet due to your weight so:

kd=mg where d =2 so k = mg/2

I think you will find that the inequality is satisfied leaving more than enough for the needed Kinetic energy to provide horizontal travel.

AM
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top