Can Lasers Be Used as a Viable Energy Source Despite Their High Power Output?

AI Thread Summary
Lasers cannot be used as a viable energy source because they require an external power supply to generate light, consuming more energy than they produce. While lasers can emit high power levels, such as terawatts, this power is delivered in very short pulses, making it not a sustainable energy output. The energy input needed to create laser beams exceeds the energy output in the form of light. Therefore, despite their impressive power capabilities, lasers do not function as an energy source. The fundamental distinction between power and energy highlights this limitation.
towuzzi
Messages
8
Reaction score
0
if lasers produce so much power why can't we use it as an energy source
 
Science news on Phys.org
Well to get a laser beam you have to supply energy right? If laser is used as an energy source you are getting nothing but the same energy you had supplied, practically lesser perhaps...
 
towuzzi said:
if lasers produce so much power why can't we use it as an energy source

Here are schematics of three laser devices; red laser pointer, green laser pointer and a Helium–neon laser. Where are the energy sources (power supplies) in the pictures?

green-laser-compare.jpg


Helium–neon laser:
http://www.olympusconfocal.com/java/henelasers/henelasersfigure1.jpg
 
Last edited by a moderator:
some can produce terawatts of power so where do they get all that energy to feed into the laser
 
towuzzi said:
some can produce terawatts of power so where do they get all that energy to feed into the laser
Power is not energy. Terawatt lasers produce very short pulses.

As others have pointed out, lasers are not a source of energy. The consume more energy than what comes out in the form of light.
 
Last edited:
Thread 'A quartet of epi-illumination methods'
Well, it took almost 20 years (!!!), but I finally obtained a set of epi-phase microscope objectives (Zeiss). The principles of epi-phase contrast is nearly identical to transillumination phase contrast, but the phase ring is a 1/8 wave retarder rather than a 1/4 wave retarder (because with epi-illumination, the light passes through the ring twice). This method was popular only for a very short period of time before epi-DIC (differential interference contrast) became widely available. So...
I am currently undertaking a research internship where I am modelling the heating of silicon wafers with a 515 nm femtosecond laser. In order to increase the absorption of the laser into the oxide layer on top of the wafer it was suggested we use gold nanoparticles. I was tasked with modelling the optical properties of a 5nm gold nanoparticle, in particular the absorption cross section, using COMSOL Multiphysics. My model seems to be getting correct values for the absorption coefficient and...
Back
Top