Can Light Influence Gravity and Act as a Gyroscope in Space?

  • Thread starter Thread starter Falon
  • Start date Start date
  • Tags Tags
    Gravity Light
AI Thread Summary
The discussion explores the concept from the book 'Virgintell' that suggests light could function as a solid-state gyroscope. In a simulated experiment, increasing the intensity of a light beam allows it to traverse the universe, leading to the notion that light can distort space by attracting galaxies. The experimenter constructs a massive coil of hollow fiber optics, which demonstrates gyroscopic behavior when light is passed through it. Despite the intriguing ideas presented, the consensus is that the feasibility of using light in this manner remains within the realm of science fiction. The conversation highlights the thin boundary between scientific possibility and speculative concepts.
Falon
Messages
1
Reaction score
0
In the book 'Virgintell' which has a lot of seemingly high ideas about science there is the proposition that light can be used to make a solid state gyro. {not like an osciloscope}.

Summary.

In a 3D computer simulated experiment the developer tries to send a light beam across the universe. It doesn't go. So the intensity of the light is increased. It does go across.

The light is then turned to the maximum imaginable and the effect is to distort the universe by attracting the galaxies.[ Shearing says galaxies bend light so equally and oppositely the light must bend the galaxies path.]

This is noted and the experimenter has heard light is either a wave or particles...makes a massive coil of hollow fibre optics and puts a vast amount of light through it.

1. The loose end of the fibre optics moves around like a hose.
2. The coil shows the same behaviour as a gyroscope. It is then used in space ships.

Q. Is the above possible.
 
Engineering news on Phys.org
No. Theres a fine line between science and science fiction these days.
 
A light inductor! Brilliant!
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Back
Top