Can Velocity be Accurately Calculated? | SNK

  • Thread starter Thread starter aneesh123
  • Start date Start date
  • Tags Tags
    Velocity
AI Thread Summary
The discussion centers on the calculation of velocity in relation to a marble falling from a height. It clarifies that the time taken for the marble to fall a vertical distance is the same as the time it takes to travel horizontally. The trajectory does not affect the time taken for the fall, as the vertical speed is initially zero when the marble leaves the table. The horizontal velocity does not influence the time of descent. Understanding these principles is crucial for accurately calculating velocity in this context.
aneesh123
Messages
8
Reaction score
0


[PLAIN]http://snk.in/ah.jpg
 
Last edited by a moderator:
Physics news on Phys.org
Yes, the time 't' is the time the marble takes to fall the distance H2, which is also the time it takes to travel the distance 'd'. So it's the same time for both.
 
thanks doc ,can you explain in detail, how the time will be same for both the distance?

does the trjectory affect the time taken ?
 
aneesh123 said:
thanks doc ,can you explain in detail, how the time will be same for both the distance?
I'm not sure what you need explained. Going from b to the floor takes a certain about of time. So, in that same time the marble travels a vertical distance and a horizontal distance.

does the trjectory affect the time taken ?
The marble is traveling horizontally when it leaves the table. So the vertical speed is 0. That's all you need to find the time, regardless of the horizontal velocity.
 
Thanks very much doc
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top