Capacitor Inductance: Unraveling the Mystery

AI Thread Summary
Capacitors are unique in their ability to counteract inductance in a circuit due to their relationship with changing electric and magnetic fields. Unlike resistors and inductors, capacitors are often more prominent in circuits, leading to a focus on their purity. All electronic components have parasitic elements, which can affect performance, especially at high frequencies. Inductors, for example, can have self-capacitance that leads to resonance issues. Understanding these concepts requires patience and further study in AC theory.
sam986
Messages
7
Reaction score
0
Can't find an answer to my question. Why do capacitors are so special when it comes to purity, unlike resistors and inductors. I know the capacitor somehow impedes the inductance in the circuit, but how? I just began studying the ac theory, and it boggles my mind.
 
Engineering news on Phys.org
Welcome to PF;
The capacitor counters an inductance in series with it due to the relationship between changing electric and magnetic fields.
It is not a simple one, and the theory you are learning now is not the whole story.
You'll need to be a bit patient.
 
sam986 said:
Can't find an answer to my question. Why do capacitors are so special when it comes to purity, unlike resistors and inductors. I know the capacitor somehow impedes the inductance in the circuit, but how? I just began studying the ac theory, and it boggles my mind.
All components have 'parasitics'. (Try Google on Electronic component parasitics) Indeed, inductors are plagued with self capacitance and many high value inductors will self resonate at low Radio Frequencies (all those coils sitting next to each other with associated capacitance). I think the reason that Capacitors come to mind is that your average circuit has many more capacitors than inductors ('wound components' are expensive to make and tend to be avoided where possible). Even metal film resistors are often made with helical grooves in them which gives them significant inductance at UHF and above. You can buy more expensive resistors that have a longitudinal slot to adjust resistance; much better at high frequencies. Small, chip resistors and capacitors behave pretty well on circuit boards that operate well into the GHz region (look inside your computer).
 
Alright then thank you for the answers.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Back
Top