Child walking across frozen pond (friction involved)

  • Thread starter Thread starter aeromat
  • Start date Start date
  • Tags Tags
    Pond
AI Thread Summary
A child standing 12 meters from the shore on a frozen pond with a static friction coefficient of 0.05 must determine the minimum time to walk without slipping. The frictional force acting against her movement was calculated using the equation Ff = uFn, leading to a net force equation of Ff = -ma. By substituting the values, the acceleration was found to be -0.50 m/s². Using kinematic equations, the time to reach the shore was calculated to be approximately 22 seconds. The solution appears to be correct, but the absence of an answer in the textbook leaves uncertainty.
aeromat
Messages
113
Reaction score
0

Homework Statement


A child stands on the surface of a frozen pond, 12m from the shore. If the coeff- of static friction between her boots and the ice is 0.05, determine the min. time req. for the child to walk to the shore without slipping.


Homework Equations


Ff = (u)(Fn)?


The Attempt at a Solution


In a FBD, I drew the Fn and Fg, and Ff acting against her movement. However, I am not sure whether she has an applied force or not; the question does say she is going to walk to the shore. I am not sure how I can manipulate the equations and end up getting time. We are only given displacement of 12m, and no other variable for a kinematic equation viewpoint.
 
Physics news on Phys.org
You are on the right track with Ff = u Fn.

Now considering this force, what is the kinematic equation that will relate distance, acceleration, and time? They did not tell you how much the child weighs. Maybe the mass cancels out. :smile:
 
Actually here I did it and this is what I got:
Further Work Done:
Net force in the x-component {Ff = -ma}
I split Ff into (mu)(m)(g) = -m(a) <-- canceled out the m's
(0.05)(9.81) = -a
a = -0.50m/s^2

Used this a, d, and assuming V1 is 0 to solve for t using a kinematics equation.
d = V1(t) + 1/2(a)(t)^2
t = 4 root 3, or roughly 22s.

Have I done it right? There is no answer at the back for this one.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top