Circuit comparison in everycircuit

AI Thread Summary
A user attempted to recreate a circuit from EveryCircuit but encountered issues with functionality. After comparing their reproduction with the original, they identified a discrepancy in the dimensions of a component, specifically the width of an n-channel MOSFET. Adjusting the measurement from 1 μm to 1 mm resolved the problem, allowing the circuit to work correctly. The user acknowledged their inexperience in electronics and considered taking breaks when facing difficulties. This highlights the importance of attention to detail in circuit design and reproduction.
TeaLeaf
Messages
2
Reaction score
0
Hi.
Found a circuit pre made at everycircuit and tryed to reproduce it for scratch but the new circuit does not work. I am as new to electronics as one can be, so that is why i ask if i don't understand something with these circuits or is this probably a bug with everycircuit?
In image left is reproduced; Right original.

Credit for original circuit: bixio @ everycircuit

PS. This was the closest forum section i should find, Did not intend to wrong post is so.
 

Attachments

  • Screenshot from 2018-03-11 09-35-02.png
    Screenshot from 2018-03-11 09-35-02.png
    26.6 KB · Views: 587
Engineering news on Phys.org
What is this thing in the right lower corner, that is 1 μm on the left and 1 mm on the right?
 
  • Like
Likes berkeman
Borek said:
What is this thing in the right lower corner, that is 1 μm on the left and 1 mm on the right?
Did not se that. Changed the reproduction to 1mm and it works. Thanks.
It is the width of an n-channel mosfet, That is all i know.
I should probably start taking a brake when I am stuck.
 
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Thread 'EMF (Electromagnetic Field) & EHS (Electromagnetic Hyper Sensitivity)'

Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
View full post »

Similar threads

Need help in understanding these circuits
Replies
2
Views
2K
Deciding batteries for my circuit
Replies
3
Views
1K
How does AM broadcasting/receiving work + a project for HS students?
Replies
20
Views
1K
Op-amp compensation of cascade fudges audio signal oddly
Replies
3
Views
2K
Materials for DTL, TTL circuit analysis
Replies
8
Views
2K
Solving Power Delivery Issues in a 5V Series Circuit with a 1.5V Rated Relay
Replies
12
Views
3K
Is this an AC/DC converter circuit?
Replies
10
Views
3K
Charlieplexing: LEDs have different brightness
Replies
14
Views
2K
Increasing the Battery Life of an LED Circuit
Replies
26
Views
4K
Adding resistors to a differentiating op-amp?
Replies
8
Views
2K

Hot Threads

Recent Insights

Back
Top