Clarifying Thyristor Rectification: Common Questions Answered

  • Thread starter Thread starter Steve619
  • Start date Start date
AI Thread Summary
A single-phase, half-controlled bridge rectifier cannot function as an inverter unless connected to an inductive load, which allows it to act as a current generator. When connected to an inductive load, the stored inductor current keeps the thyristors conducting even when the voltage reverses. The discussion emphasizes the importance of understanding the timing of SCR firing and the behavior of current and voltage in inductive circuits. It highlights that current can flow in the opposite direction to the voltage, allowing the SCR to remain forward biased. Overall, the interaction between inductance and rectification principles is crucial for understanding thyristor operation.
Steve619
Messages
4
Reaction score
0
Hello, I am new here so forgive any noob-ness,

I am doing a study on Thyristor rectification and have a few questions:

A single-phase, half controlled bridge rectifier cannot be an inverter?

-Unless it is connected to an inductive load, then it can?

A single-phase, half controlled bridge rectifier connected to an inductive load acts like a current generator as the stored inductor current means the thyristors won't turn off when the voltage changes direction?
Those are the questions and the main question to all of them is "are those statements correct?"

Thanks
 
Engineering news on Phys.org
A picture would sure help.
Your words paint a picture in my mind but how am i to know it's the same picture as in your mind?

So i am reluctant to venture a guess.

My answer would be - "can't rightly say."

I can say this
http://protorit.blogspot.com/2013/02/single-phase-half-wave-controlled-rectifier-performance.html
upload_2016-2-18_22-15-38.png

As ambiguous as the labeling is on this chart we can glean something from it that relates to your questions

Simplify your thinking and go one step at a time:

At time α the SCR gets fired. Assume it's fired by a brief pulse so we don't have to worry about gate timing any more..
Current commences to flow in the load, PUSHED clockwise by Vs . That is building stored energy in the inductor.
Current's phase lags voltage because of inductance.
At time pi, when Vs has returned to zero, and shortly thereafter, note we still have current and in same direction.
That current is now being PULLED clockwise by inductance.
Stored energy of inductor is partly dissipated in the resistor and partly returned to the source.
When that energy is spent current ceases and SCR "commutates", that is it turns off.

So while it looks at first glance impossible, current does actually flow briefly opposite Vs and the SCR remains forward biased.It's a beautiful demonstration of the laws of Ohm Kirchoff and Lenz. It's exactly how we move the rods in my nuke plant(well, actually we have 3 phase half wave , no different though).

A question well stated is half answered. I hope above helps you rephrase yours.
 
  • Like
Likes cnh1995
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top