Coversion - how many amps in 310 kW?

  • Thread starter Thread starter ccenteno1
  • Start date Start date
  • Tags Tags
    Amps
AI Thread Summary
To convert 310 kW to amps, divide 310,000 watts by the voltage. The formula used is current in amps equals power in watts divided by voltage. The discussion highlights the importance of using online resources for quick answers. A user expresses a lack of engineering knowledge, prompting suggestions for using Google Search for assistance. Understanding this conversion is essential for electrical calculations.
ccenteno1
Messages
2
Reaction score
0
Coversion -- how many amps in 310 kW?

Hello all, I am engineering handicap, can someone help me figure out how many amps in 310 kW.
 
Engineering news on Phys.org
ccenteno1 said:
Hello all, I am engineering handicap, can someone help me figure out how many amps in 310 kW.

There is this really nifty facility on the internet called "Google Search". You should consider learning how to use it since it will readily give you the answer to all such questions.
 
Current in amps, multiplied by voltage, is the power in watts.
So divide 310000 by the voltage and you will get the current in amps.
 
Thanks for being Baluncore for being helpful.
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

"Ground" and "Center Tapped" Power Transformer Secondary in guitar amp
Replies
6
Views
3K
Amplifier for piezoelectric sensor, OP Amp circuit
Replies
6
Views
5K
High Volts Low Amps: Sustaining Power with Arduino & MOSFET
Replies
7
Views
2K
Gravity Based Electricity Generator
2
Replies
74
Views
7K
AC Induction motor startup current
Replies
6
Views
4K
Generator tripping on ground fault during load test
Replies
38
Views
7K
Electrical Consumption of Machine
Replies
22
Views
3K
How to calculate power using amps drawn?
Replies
10
Views
2K
DC input random offset voltage for diff. amplifier with current-mirror load
Replies
2
Views
1K
Op-amp compensation of cascade fudges audio signal oddly
Replies
3
Views
2K

Hot Threads

Recent Insights

Back
Top