How to Design a DC-DC Flyback Converter Operating in CCM and DCM?

  • Thread starter Thread starter aabrahim
  • Start date Start date
  • Tags Tags
    Converter
AI Thread Summary
Designing a DC-DC flyback converter that operates in both Continuous Conduction Mode (CCM) and Discontinuous Conduction Mode (DCM) requires understanding specific parameters that influence operation modes, such as transformer selection and MOSFET characteristics. Resources like National Semiconductor's Simple Switcher series and Power Integrations' evaluation kits provide valuable insights and practical examples. Reference designs and application notes, particularly from authors like Basso, can significantly aid in the design process. Interactive design tools from companies like Coilcraft can simplify the initial design phase. Comprehensive research and reliable references are essential for successful implementation.
aabrahim
Messages
1
Reaction score
0
Hi everyone,

I need your help in designing and controlling a DC to DC flyback converter that operate in both CCM & DCM. where to start? and what is special about these kind of converters? and will i find a ready-made transformer for such a converter? how to choose the right MOSFET? what parameters will play the role of deciding the operation mode?
can you suggest a reference-design or a datasheet so i can start the job.

many thanks in advance

Regards
 
Engineering news on Phys.org
aabrahim said:
Hi everyone,

I need your help in designing and controlling a DC to DC flyback converter that operate in both CCM & DCM. where to start? and what is special about these kind of converters? and will i find a ready-made transformer for such a converter? how to choose the right MOSFET? what parameters will play the role of deciding the operation mode?
can you suggest a reference-design or a datasheet so i can start the job.

many thanks in advance

Regards

Welcome to the PF.

What is the context of your question? Is this for schoolwork?

What research have you done so far? Have you looked at the National Semiconductor Simple Switcher series? I don't know offhand if they support the flyback topology, but you can learn a lot from the Simple Switcher series of parts & support docs.
 
a google on those terms takes one to Fairchild appnotes that appear very detailed.

a few years ago i thought i was going to get into such a project and did some looking. At that time Coilcraft had interactive design aids that looked extremely easy to use, which was what i needed.

I also echo Berkeman's sentiment about National's simple switchers..
they have excellent application notes.
i started with AN556, AN711 and AN1253
though they might be too basic for you..
 
I know Power Integrations supports flyback designs.
http://www.powerint.com/
They sell evaluation kits and have links to purchase the transformers used in many of their designs.
 
To do this right you need good references. I highly reccomend "Switch-mode power supplies" by Basso. He is gifted at explaining how these things work and how they should be designed in the real world.
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

Feedback controller design for boost converter
Replies
17
Views
3K
How Do I Design an EMI Filter for a Converter with Only Voltage and Power Specs?
Replies
8
Views
2K
How to Achieve DC Biasing in a MOSFET Rectifier Design?
Replies
1
Views
1K
12V / 6A Power supply. Help with Buck and Boost converters + OR'ing circuit
Replies
2
Views
3K
MATLAB Modelling DCM Flyback Converter with MATLAB/Simulink
Replies
1
Views
7K
Buck Converter Design for PMDC Motor
Replies
1
Views
3K
Designing a Boost Converter: Finding L for CCM Operation
Replies
6
Views
2K
Electronics Designing a buck converter with feedback and a regulated output
Replies
4
Views
2K
Should DC operated oil rigs convert to AC?
Replies
1
Views
12K
How to design discrete circuits for transistor beta changes?
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top